*GetYourWheels* Shipment Of The Day Showroom
08-13-2014, 10:41 PM
#122
Former Sponsor
Thread Starter
iTrader: (5)
Heres a finish thats not for everyone, but I think its one of the most stunning finishes yet!
M510 in Bespoke 3 Brushed Candy Red
20x10s all around going out to a G37
The red really shows off the brushing unlike any other color I've seen so far!
M510 in Bespoke 3 Brushed Candy Red
20x10s all around going out to a G37
The red really shows off the brushing unlike any other color I've seen so far!
08-14-2014, 05:55 PM
#125
Former Sponsor
Thread Starter
iTrader: (5)
Heres a set of M510s in Bespoke 3 Brushed Matte Clear
Great looking finish!
Forgestars finally came back in stock this week...
Backorders are being fulfilled, thanks for the patience all!
Great looking finish!
Forgestars finally came back in stock this week...
Backorders are being fulfilled, thanks for the patience all!
08-20-2014, 02:42 PM
#129
Former Sponsor
Thread Starter
iTrader: (5)
Many have been asking for completed photos of the new Alpha Forged wheel, well the first photos are finally available!
Centers have brushed faces and polished windows, with a matte dark tinted (DDT) powdercoat over it!
Also shown is the Titanium hardware which is a standard feature!
Some asked for photos of the back of the wheel, so here it is:
You can see the pocketing on the back to shave off as much weight as possible
This center weighs only about 7.8 pounds!
Some additional info on the Titanium Hardware that comes standard with Alpha Forged:
Weight of the normal steel bolt and nut: 0.8 OZ
Weight for the Titanium bolt and nut: 0.4 OZ
Thats half the weight!
Multiply that by 40 bolts = 16 oz
Thats a savings of 1 lb per wheel, not the biggest difference, but all the weight savings is around the edge which is more beneficial than weight saved towards the center.
We are still looking for partial sponsorship cars to run these, so contact me sponsorship information!
Centers have brushed faces and polished windows, with a matte dark tinted (DDT) powdercoat over it!
Also shown is the Titanium hardware which is a standard feature!
Some asked for photos of the back of the wheel, so here it is:
You can see the pocketing on the back to shave off as much weight as possible
This center weighs only about 7.8 pounds!
Some additional info on the Titanium Hardware that comes standard with Alpha Forged:
Weight of the normal steel bolt and nut: 0.8 OZ
Weight for the Titanium bolt and nut: 0.4 OZ
Thats half the weight!
Multiply that by 40 bolts = 16 oz
Thats a savings of 1 lb per wheel, not the biggest difference, but all the weight savings is around the edge which is more beneficial than weight saved towards the center.
We are still looking for partial sponsorship cars to run these, so contact me sponsorship information!
08-22-2014, 05:55 PM
#131
08-23-2014, 12:21 PM
#132
Here are the very first sets of Bespoke 3 Brushed Polish on AG's M series line!
20" M580s for a Tesla Model S
Finish is Bespoke 3 Brushed Polished - Brushed faces, polished windows, and brushed barrels!
20" M580s for a Tesla Model S
Finish is Bespoke 3 Brushed Polished - Brushed faces, polished windows, and brushed barrels!
The following users liked this post:
G37Some (08-25-2014)
08-25-2014, 07:40 PM
#135
