The OFFICIAL "I have a wheel offset / tire fitment question!" thread
#812
#814
Movin On!
iTrader: (13)
If these are aftermarket wheels then you will need to verify clearance for your big S brakes though.
The following users liked this post:
dtangdynasty (07-25-2015)
#815
I assume these are standard OEM Infiniti coupe wheels, that slight 2mm offset difference just brings the front wheel out a bit to be more in line w/ the wider rears, barely noticeable really.
If these are aftermarket wheels then you will need to verify clearance for your big S brakes though.
If these are aftermarket wheels then you will need to verify clearance for your big S brakes though.
Correct, these are the IPL wheels. As long as there's no clearance issues in the inside, I have no other worries. Thanks a lot for your responses.
#816
Registered Member
iTrader: (2)
Best offest for Stock Suspension?
What's the best offset for 19x9.5 (front) and 19 x 10.5 (rear).
Bone stock sports suspension. Looking for semi aggressive on normal tires.
Not feeling the fat lady in a G string with butt cheeks sticking out trying to catch some fresh air look.
Thanks
Bone stock sports suspension. Looking for semi aggressive on normal tires.
Not feeling the fat lady in a G string with butt cheeks sticking out trying to catch some fresh air look.
Thanks
#818
Registered Member
iTrader: (2)
2015 Q60 Coupe. Picking this up next week if the numbers are right.
Looking at the Works CR 2P, Step Lip, GT Silver.
This is the number one of the sponsers gave me. How would this look on bone stock suspension. (not planning to drop at all).
19x9.5 +22 19x10.5 +22
Looking at the Works CR 2P, Step Lip, GT Silver.
This is the number one of the sponsers gave me. How would this look on bone stock suspension. (not planning to drop at all).
19x9.5 +22 19x10.5 +22
#819
Movin On!
iTrader: (13)
As long as your very clear w/ the vendor about your brake setup and how flush you want your wheels/tires to be at the fender they should get you a good setup. The 10.5 +22 will poke at stock height but running a stretch tire should still allow them to tuck into the fender.
#820
Registered Member
iTrader: (2)
It gets a little tricky if your Q60 has the big sport brakes, the Work R-Disc has the most clearance behind the spokes to clear big calipers, the A Disc is the middle ground and the O Disc has the deepest concave/dish w/ the least clearance.
As long as your very clear w/ the vendor about your brake setup and how flush you want your wheels/tires to be at the fender they should get you a good setup. The 10.5 +22 will poke at stock height but running a stretch tire should still allow them to tuck into the fender.
As long as your very clear w/ the vendor about your brake setup and how flush you want your wheels/tires to be at the fender they should get you a good setup. The 10.5 +22 will poke at stock height but running a stretch tire should still allow them to tuck into the fender.
Not feeling the "Stretch look", where the rims sticks out and the tire looks like is about to die.
So, what do you recommend the offset to be at stick height? I don't want the rims to stick out at all.
#821
Movin On!
iTrader: (13)
If you don't want any poke offset in the +30 to +35 range would be better. Might use this calculator and plug in your current rim and then the new setup and just get a measuring stick put up to your current set and see what it will take to get right at that fender edge.
https://www.myg37.com/forums/tire_rim_calculator.php
The following users liked this post:
User 122320 (07-23-2015)
#822
Registered User
Hello all,
Like most of you i've been going back and forth on wheel/tire setups in most if not all of my free time. Recently i came across a brand of wheels called Ambit and was curious if anyone knew anything about them?
I drive an 08 g37s coupe and would like to replicate the G they advertise with a 18x9.5 et15 and 18x10.5 et15? Any tire suggestions that would work with eibach pro kit springs?
Thanks
Like most of you i've been going back and forth on wheel/tire setups in most if not all of my free time. Recently i came across a brand of wheels called Ambit and was curious if anyone knew anything about them?
I drive an 08 g37s coupe and would like to replicate the G they advertise with a 18x9.5 et15 and 18x10.5 et15? Any tire suggestions that would work with eibach pro kit springs?
Thanks
#823
Registered User
i have a 09 G37S sedan, no akebonos currently with 245/45/18 all round with Rays Gram Lights 57F Pro 18x7.5 +47 f&r, i've been told this is a bad fitment and i plan to run spacers, would this fitment be rubbing anything as at the moment the car is in the shop with issues with the rear rotors (need machining possibly).
I also plan to change out for Work Emotions XD9 18x9 +30 all round, would this fit with 245 or 255s better?
Thanks
I also plan to change out for Work Emotions XD9 18x9 +30 all round, would this fit with 245 or 255s better?
Thanks
#824
Movin On!
iTrader: (13)
Hello all,
Like most of you i've been going back and forth on wheel/tire setups in most if not all of my free time. Recently i came across a brand of wheels called Ambit and was curious if anyone knew anything about them?
I drive an 08 g37s coupe and would like to replicate the G they advertise with a 18x9.5 et15 and 18x10.5 et15? Any tire suggestions that would work with eibach pro kit springs?
Thanks
Like most of you i've been going back and forth on wheel/tire setups in most if not all of my free time. Recently i came across a brand of wheels called Ambit and was curious if anyone knew anything about them?
I drive an 08 g37s coupe and would like to replicate the G they advertise with a 18x9.5 et15 and 18x10.5 et15? Any tire suggestions that would work with eibach pro kit springs?
Thanks
#825
Movin On!
iTrader: (13)
i have a 09 G37S sedan, no akebonos currently with 245/45/18 all round with Rays Gram Lights 57F Pro 18x7.5 +47 f&r, i've been told this is a bad fitment and i plan to run spacers, would this fitment be rubbing anything as at the moment the car is in the shop with issues with the rear rotors (need machining possibly).
I also plan to change out for Work Emotions XD9 18x9 +30 all round, would this fit with 245 or 255s better?
Thanks
I also plan to change out for Work Emotions XD9 18x9 +30 all round, would this fit with 245 or 255s better?
Thanks
The 18x9 +30 Work wheels will be right at the fender in front so no wider than a 245, they also have them in a +38 which you could then run wider 255 tires but may have clearance issues if you get Akebonos.