blnewt

iTrader: (13)

With Eibachs it will probably poke a little in back, if you could run +40 in back that would be better IMO.

RedlineAZ

iTrader: (2)

Thanks for the reply man! Do you think it will be overly aggressive or rub? I think the wheels I want only come in those sizes

blnewt

iTrader: (13)

Take a look at rochesters G, its a 10" +42 on 275s lowered about like Eibachs
https://www.myg37.com/forums/build-t...ers-new-g.html

chris_s

lots of information on here about this but looking for confirmation...

looking at some staggered coupe wheels for my awd sedan

tires are
245/40/19
275/35/19

The recommendation I've seen in other threads is to go 285/35/19, but both are showing 0.52% difference from the fronts, one bigger and one smaller.

Is the rule of thumb for awd diameter differences 1%?

thx

witham9

Finally got my wheels and tires installed. Did a bunch of research using this thread. Let me know what you think.

2013 G37 Sedan
Eibach Pro Springs
Avant Garde M310
20x9 +30. 20x10 +40.
Toyo Proxes 4 Plus A/S
245/35. 275/30.

witham9

chris_s

looks good, rears maybe 5mm too aggressive for my tastes

blnewt

iTrader: (13)

Looking awesome Witham!

blnewt

iTrader: (13)

Chris, I'd go w/ either of the following combos~
235/40/19front 275/35/19 rear (rear tire .67% taller)
245/40/19front 285/35/19 rear(rear tire .51% taller)
Having the rear slightly taller will bring your variance closer to zero over time since your rear tires wear faster. The 245/275 combo will work but the rear tires are already .52% smaller so the variance will increase over time.
Hope that helps and makes sense.
Brad

G37Some

iTrader: (1)

any1 know if wheels can be machined after purchase to adjust the offset (safely & efficiently)?

blnewt

iTrader: (13)

It's been done, it depends on how much of the hub mount is available. You'd have to find a shop that specializes in such machining. I'm sure there are several variable that come into play and I'm sure it wouldn't be cheap

RedlineAZ

iTrader: (2)

Stance SC8
20x9+32 with 245/35/20
20x10 +35 with 275/30/20
Lowered with an Eibach Pro Kit
No fender rubbing, no fender rolling.

blnewt

iTrader: (13)

Nice job Redline^^^^^ looks like a great fit and nice choice in wheels & finish

pledes23

I should have researched a little more, my apologies for posting elsewhere.

I have a 2011 g37x Sedan on stock suspension

How would 19x8 40 offset with 245/40/19 square setup work for my car? Any issues with camber, or poking out?

Thanks in advance.

blnewt

iTrader: (13)

Good, no poke, might need spacers as you go lower.