The OFFICIAL "I have a wheel offset / tire fitment question!" thread
#2523
#2525
2012 Coupe wheel/tire help!!
looking to get a set of Aodhan DS02 wheels, F: 19x9.5 R: 19x11 they come in offsets of +15 and +22 and i’m not sure what to choose. i want to run DSW06 245/35 in the font and 275/35 rear..i will be lower on Tein Flex Z coilovers with spc rear camber arms if that matters. i want to make sure i pick the right size. thank u!
#2526
Stretched tire setup help
What tire sizes would I need to get a mild stretch on 19 x 9 rims and 19 x 10 rims with +28 offset? Don’t wanna go to crazy but want that mild stretch look. I have a 2008 g35 sedan and lowered so it not trying to rub either
#2527
I have a 2013 ipl coupe. Stocks suspension. I found some feradda fr4 wheels.
fronts are 19x9.5 +40 with 245/35 tires
rears are 19x10.5 +43 with 275/40 tires.
i think i will need a spacer in the front to clear the big brakes. 15-20mm
Should i get a spacer in the rear? I want as flush of a look as possible without needing fenders rolled/pulled. No rubbing if possible.
will these fit? I’m getting the whole set for less than the cost of the wheels. I was about to buy new wheels and tires but these came up. I could still get different tires if needed. Open for suggestions.
fronts are 19x9.5 +40 with 245/35 tires
rears are 19x10.5 +43 with 275/40 tires.
i think i will need a spacer in the front to clear the big brakes. 15-20mm
Should i get a spacer in the rear? I want as flush of a look as possible without needing fenders rolled/pulled. No rubbing if possible.
will these fit? I’m getting the whole set for less than the cost of the wheels. I was about to buy new wheels and tires but these came up. I could still get different tires if needed. Open for suggestions.
#2528
Registered User
Join Date: Aug 2024
Location: Gun Barrel City
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
19x9.5 Wheels that clear akebobo
If you have a question about wheel offsets on your coupe, sedan, or convertible post it here. But before posting, please do a little research on your own. Check with another member who you are aware has a similar offset as yours and ask them. Check this thread thoroughly to see if it's already been asked/answered. Use the tire/wheel calculator at the top of this page in orange to see if it answers your question. Search the entire forum to see if it has been addressed somewhere besides the Wheels & Tires forum. Ask a trusted wheel vendor that you are considering buying from to see if they might already have dealt with your situation and have an answer. If you still haven't found what you are looking for, post your question here so that these questions are all in one place that's easy to find for those wheel fitment gurus who are willing and able to help answer your questions.
If you are replying to a question with an answer, please make sure you are knowledgeable and have the correct answer. Double check that you are right before posting and giving someone the wrong answer or subjecting yourself to the scorn and ridicule of your peers.
Lastly, we will attempt to consolidate existing offset question threads into this thread so that they are easy to find and the thread can serve as something of a reference. Please help by reporting stray offset question threads (by clicking the "Report Post" button in the first post of the thread) so that the staff can do our best to try to move them all here.
Thanks and happy modding!
If you are replying to a question with an answer, please make sure you are knowledgeable and have the correct answer. Double check that you are right before posting and giving someone the wrong answer or subjecting yourself to the scorn and ridicule of your peers.
Lastly, we will attempt to consolidate existing offset question threads into this thread so that they are easy to find and the thread can serve as something of a reference. Please help by reporting stray offset question threads (by clicking the "Report Post" button in the first post of the thread) so that the staff can do our best to try to move them all here.
Thanks and happy modding!
Thanks in advance... complete noob here.
Thread
Thread Starter
Forum
Replies
Last Post