The OFFICIAL "I have a wheel offset / tire fitment question!" thread
#2431
Registered Member
#2432
Movin On!
iTrader: (13)
255s on 10.5 width is fairly common, not what I'd want to run but better than running a real wide tire on a narrow wheel since you'll have better sidewall stability on a stretch vs a pinch mount. Also your wheel edge will be much more exposed. And running them on a sedan you will probably need to add some camber to keep off the fenders too
Last edited by blnewt; 04-08-2019 at 10:33 PM.
#2433
Registered Member
255s on 10.5 width is fairly common, not what I'd want to run but better than running a real wide tire on a narrow wheel since you'll have better sidewall stability on a stretch vs a pinch mount. Also your wheel edge will be much more exposed. And running them on a sedan you will probably need to add some camber to keep off the fenders too
#2434
Actually, that's wrong as well. 275/40/19 and 245/45/19 are the EXACT same except for width.
#2436
Registered Member
hello everyone new to the forum, I wanted to know what size spacers to get for my stock ipl vert rims for rear and front to make it pop out a bit. stock height no other suspension mods for now. Appreciate the answers and a pic would be nice as well. Thanks
The following users liked this post:
flipmodeq60ipl (04-19-2019)
#2440
Registered Member
Yeah man barely inside,wheel wouldn't even turn because it was sitting on the fender, went all the way negative,lifted up the coils but nada..I like how the 10.5 looks but I might have to get one with a higher offset or or just go 10 in the rear, bit these came off a coupe so I'm like what the hell lol
#2441
Registered Member
Hi everyone, newbie here. Been looking on the forum for seems like forever to find the right wheel size and offset that I would like.
I narrowed it down to a square setup for my Journey Coupe
19x9.5 +20 to +25 w/ 255/40 tire
(may need a spacer in the rear but i'm ok with that)
I want something as flush as possible yet functional. I am going to be putting Eibach springs. Jut want to make sure this setup will work before I start looking at wheels so I know exactly what to look for.
Thanks!
I narrowed it down to a square setup for my Journey Coupe
19x9.5 +20 to +25 w/ 255/40 tire
(may need a spacer in the rear but i'm ok with that)
I want something as flush as possible yet functional. I am going to be putting Eibach springs. Jut want to make sure this setup will work before I start looking at wheels so I know exactly what to look for.
Thanks!
#2442
Movin On!
iTrader: (13)
Hi everyone, newbie here. Been looking on the forum for seems like forever to find the right wheel size and offset that I would like.
I narrowed it down to a square setup for my Journey Coupe
19x9.5 +20 to +25 w/ 255/40 tire
(may need a spacer in the rear but i'm ok with that)
I want something as flush as possible yet functional. I am going to be putting Eibach springs. Jut want to make sure this setup will work before I start looking at wheels so I know exactly what to look for.
Thanks!
I narrowed it down to a square setup for my Journey Coupe
19x9.5 +20 to +25 w/ 255/40 tire
(may need a spacer in the rear but i'm ok with that)
I want something as flush as possible yet functional. I am going to be putting Eibach springs. Jut want to make sure this setup will work before I start looking at wheels so I know exactly what to look for.
Thanks!
#2443
Registered Member
Thanks for chiming in blnewt - do you think a 245/40 would be better to be into spec? The wheels I am currently looking at are 19x9.5 +22
Last edited by G3SIETE; 05-29-2019 at 09:58 AM.
#2444
Registered Member
iTrader: (1)
Alright so I am ready for another set of wheels, and this time I have decided to going with 2 piece wheels. I am looking at getting a custom built set from GMR wheels. Anyways I have a 2012 Infiniti G37x AWD coupe. I have the Fly1 Motorsports 12mm wider fenders in the front and I am on airlift with an bbk upgrade. I was thinking of running 19x10 in front and 19x11 in rear. Not sure on offsets my knowledge isn't so great. Tires I was thinking 245/35 in front and 275/35 in rear. Whats y'all opinion on fitment? any information would greatly be appreciated. Don't want to spend the money if its not going to look great.
#2445
Movin On!
iTrader: (13)
Alright so I am ready for another set of wheels, and this time I have decided to going with 2 piece wheels. I am looking at getting a custom built set from GMR wheels. Anyways I have a 2012 Infiniti G37x AWD coupe. I have the Fly1 Motorsports 12mm wider fenders in the front and I am on airlift with an bbk upgrade. I was thinking of running 19x10 in front and 19x11 in rear. Not sure on offsets my knowledge isn't so great. Tires I was thinking 245/35 in front and 275/35 in rear. Whats y'all opinion on fitment? any information would greatly be appreciated. Don't want to spend the money if its not going to look great.
As far as offsets, really depends how much camber you want to run at drive height, for in spec camber at drive height offset in the +25 range in front and +35 in back would seem pretty. close. If you're wanting a cambered look when running you can run less positive on the offsets
Need to confirm BBK clearance w/ vendor too.