The OFFICIAL "I have a wheel offset / tire fitment question!" thread
#2359
Movin On!
iTrader: (13)
Mine w/ that wheel size, first post is 245/45s all around the 2nd is 245/45F 285/40R
https://www.myg37.com/forums/18/2765...ml#post4044919
https://www.myg37.com/forums/18/2765...ml#post4135181
For square I'd go w/ Gabes 255/45 setup, there IS enough room for that up front
https://www.myg37.com/forums/18/2765...ml#post4044919
https://www.myg37.com/forums/18/2765...ml#post4135181
For square I'd go w/ Gabes 255/45 setup, there IS enough room for that up front
#2360
Registered Member
iTrader: (5)
Mine w/ that wheel size, first post is 245/45s all around the 2nd is 245/45F 285/40R
https://www.myg37.com/forums/18/2765...ml#post4044919
https://www.myg37.com/forums/18/2765...ml#post4135181
For square I'd go w/ Gabes 255/45 setup, there IS enough room for that up front
https://www.myg37.com/forums/18/2765...ml#post4044919
https://www.myg37.com/forums/18/2765...ml#post4135181
For square I'd go w/ Gabes 255/45 setup, there IS enough room for that up front
#2361
Registered Member
Okay, : Sedan fitment:
19x10 +22 all around on 265/30ZR19's? Possible?
Anyway to figure out if the big brakes will clear on these wheels as well? Exact wheel here. https://www.srzperformance.com/produ...910-6522bk.htm
19x10 +22 all around on 265/30ZR19's? Possible?
Anyway to figure out if the big brakes will clear on these wheels as well? Exact wheel here. https://www.srzperformance.com/produ...910-6522bk.htm
#2362
Registered Member
iTrader: (1)
Okay, : Sedan fitment:
19x10 +22 all around on 265/30ZR19's? Possible?
Anyway to figure out if the big brakes will clear on these wheels as well? Exact wheel here. https://www.srzperformance.com/produ...910-6522bk.htm
19x10 +22 all around on 265/30ZR19's? Possible?
Anyway to figure out if the big brakes will clear on these wheels as well? Exact wheel here. https://www.srzperformance.com/produ...910-6522bk.htm
Also, isn't 265 a stretch on 10" wide wheels?
#2363
Registered Member
Man, that's a lot of "poke" even for a coupe (front wheels) I believe the sedans are even more conservative on offsets....gotta have blnewt chime in, but on my coupe I wouldn't go that aggressive on the front wheels. The rim lip would stick out too far.
Also, isn't 265 a stretch on 10" wide wheels?
Also, isn't 265 a stretch on 10" wide wheels?
#2364
Registered Member
iTrader: (1)
The tires I'm looking at said 10" is the max for the 265's. https://www.toyotires.com/tire/patte...petition-tires if you click the 19's 10" wide is listed as in spec. I'm okay with running like up to -2~ camber.
#2365
Registered Member
I get you, it's not going to be my daily and I'll probably be overly protective when it comes to parking.
#2366
Movin On!
iTrader: (13)
Supra, I'd take a hard pass on that set, just too much poke TBH, if you had a coupe they could work, still aggressive but at least would be driveable. I think poking that much outside the fenders will give you a look you won't be happy with and may have to really be careful under impact. Just not a user-friendly fit, bump that offset up another 15mm and your life will be simplified
#2367
Registered Member
Supra, I'd take a hard pass on that set, just too much poke TBH, if you had a coupe they could work, still aggressive but at least would be driveable. I think poking that much outside the fenders will give you a look you won't be happy with and may have to really be careful under impact. Just not a user-friendly fit, bump that offset up another 15mm and your life will be simplified
#2368
Movin On!
iTrader: (13)
Those Enkeis are available in quite a few setups, I would pass on that spec as you'll be poking a lot, you'll need much heavier camber than -2, probably in the -4 range. A coupe could make it work, still aggressive but driveable. If the offset were in the +35 to +40 range that would be much simpler although then inner clearance can be an issue