The OFFICIAL "I have a wheel offset / tire fitment question!" thread
#2071
Movin On!
iTrader: (13)
How many mm clearance do you have there? 3mm or more and I wouldn't worry, less than that is pretty tight. Subaru STIs run real tight clearance at their brakes, like 2mm from what I've read w/ some of their OEM wheel sets so I wouldn't worry too much if you've been fine so far.
#2073
Registered Member
How many mm clearance do you have there? 3mm or more and I wouldn't worry, less than that is pretty tight. Subaru STIs run real tight clearance at their brakes, like 2mm from what I've read w/ some of their OEM wheel sets so I wouldn't worry too much if you've been fine so far.
#2076
Registered Member
Ok i came across a solid deal for 255 35 19 tires..9.5 +40 square..can i grab these
#2079
Movin On!
iTrader: (13)
New question 20x10 +30 could I make those fit? X sedan https://rover.ebay.com/rover/0/0/0?m...2F332411010389
I think I'd keep looking for a set that's easier to run.
#2080
Help!!!! I’m lost
So I’ve search the forum and have no clear answer in deciding an offset. I have a 2013 G37s coupe. My plans are to throw on some wheel and tires then lower it. Is it a bad idea to go from 19 inch to 18 inch. The reason I ask is I would like to go 18 but I’m to worried about fitment issues with offset and BBK. I’ve contacted the manufacture of the wheels and was bothered by them saying it might fit. If I’m going to be throwing money towards their business I figured they would have had a 100% perfect answer .
#2081
Movin On!
iTrader: (13)
So I’ve search the forum and have no clear answer in deciding an offset. I have a 2013 G37s coupe. My plans are to throw on some wheel and tires then lower it. Is it a bad idea to go from 19 inch to 18 inch. The reason I ask is I would like to go 18 but I’m to worried about fitment issues with offset and BBK. I’ve contacted the manufacture of the wheels and was bothered by them saying it might fit. If I’m going to be throwing money towards their business I figured they would have had a 100% perfect answer .
My 18" Wedssports have good BBK clearance for example.
#2082
Registered Member
2013 X Sedan lowered on coils. Have a set of 19x9.5 +40 wheels on order. I’d love to run a square tire set up if possible, but I’d like to stay wider than 245. Will 255/265 fit the front without issues? If not can I run 285 rear and 255 front? Thanks!
#2084
To be honest I’m probably gonna get heat for it but my eyes are set on a set of ESR Wheels sr07 in Black chrome 18x9.5 +22 front 18x10 +22 rear
#2085
Movin On!
iTrader: (13)
I wouldn't push it w/ 265s though unless you aren't against having to flat roll that fender edge in front. I run staggered 245/285s on my 9.5 +38s the 285s fit real flush and the 255s in front would be better than the 245s (that's what I'll run when my fronts are ready for new treads). The 255/40 front 285/35 rear will be about 0.6% smaller in back which is ok for your AWD.
The following users liked this post:
Flannigan (03-07-2018)