The OFFICIAL "I have a wheel offset / tire fitment question!" thread
#1996
Movin On!
iTrader: (13)
Unfortunately Photobucket has ditched all their 3rd party photos, member jfisher runs them, might send him a PM and see if he can send you some pics. The wheels you posted are not the Z Nismos, but they are the Z sport wheels (the Nismos are 9.5/10.5" sets).
https://www.myg37.com/forums/build-t...cinnati-5.html
IIRC he was running a 275 in back but
https://www.myg37.com/forums/build-t...cinnati-5.html
IIRC he was running a 275 in back but
Hello,
I'm currently looking into trading my 20" Rohana RC9's for a set of 370 Nismo Forged Rays (See attached pictures).
Wheels specs are as follows:
Front are 19x9 +47 offset and rear 19x10 +30 offset 5x114.3
I have a 2012 G37S Sedan 6MT. I'm currently lowered on Tein Z Flex Coilovers, roughly at about 1.5 F, 1.0 R drop.
I'm looking to see which tire sizes would work with these wheels where I wouldn't have to pull fender/ quarters or rub. Would love to do a meaty rear setup.
Thanks in advance for the help!!
I'm currently looking into trading my 20" Rohana RC9's for a set of 370 Nismo Forged Rays (See attached pictures).
Wheels specs are as follows:
Front are 19x9 +47 offset and rear 19x10 +30 offset 5x114.3
I have a 2012 G37S Sedan 6MT. I'm currently lowered on Tein Z Flex Coilovers, roughly at about 1.5 F, 1.0 R drop.
I'm looking to see which tire sizes would work with these wheels where I wouldn't have to pull fender/ quarters or rub. Would love to do a meaty rear setup.
Thanks in advance for the help!!
#1999
Movin On!
iTrader: (13)
The fronts would be better w/ a 35 series, those 30 series in front will be almost 3/4" shorter than the rears.
#2003
Help with stock G37x Sedan
Hey everyone! Long time lurker, first time poster here. Hope someone can help me out with my stock 2012 G37x Sedan that's currently sitting on OEM 17's.
I found an ad on craigslist for a set of 18" OEM wheels off of a 2004 G35 coupe. These arent from the ad, but the pic below is what they look like. I searched for hours last night but could not find anything on this particular wheel/car model combo.
Can someone help me out?
- The seller (a younger girl who doesn't seem to know much about cars) told me they were staggered widths 8"F and 8.5"R. Does that sound accurate? Two of the wheels have tires mounted on them (225/45/18) and the other two do not, which would make it tough for me to determine. Does anyone know if these are truly staggered and/or what true wheel sizes are for this style/year/model?
#2 - Is there any chance these would be a direct fit on my stock 2012 G37x Sedan? What would be needed? What tires should I run to keep from damaging my VSD?
If it's any help, i will never lower the car or install the higher end sport brakes.
I found an ad on craigslist for a set of 18" OEM wheels off of a 2004 G35 coupe. These arent from the ad, but the pic below is what they look like. I searched for hours last night but could not find anything on this particular wheel/car model combo.
Can someone help me out?
- The seller (a younger girl who doesn't seem to know much about cars) told me they were staggered widths 8"F and 8.5"R. Does that sound accurate? Two of the wheels have tires mounted on them (225/45/18) and the other two do not, which would make it tough for me to determine. Does anyone know if these are truly staggered and/or what true wheel sizes are for this style/year/model?
#2 - Is there any chance these would be a direct fit on my stock 2012 G37x Sedan? What would be needed? What tires should I run to keep from damaging my VSD?
If it's any help, i will never lower the car or install the higher end sport brakes.
#2005
Movin On!
iTrader: (13)
Hey everyone! Long time lurker, first time poster here. Hope someone can help me out with my stock 2012 G37x Sedan that's currently sitting on OEM 17's.
I found an ad on craigslist for a set of 18" OEM wheels off of a 2004 G35 coupe. These arent from the ad, but the pic below is what they look like. I searched for hours last night but could not find anything on this particular wheel/car model combo.
Can someone help me out?
- The seller (a younger girl who doesn't seem to know much about cars) told me they were staggered widths 8"F and 8.5"R. Does that sound accurate? Two of the wheels have tires mounted on them (225/45/18) and the other two do not, which would make it tough for me to determine. Does anyone know if these are truly staggered and/or what true wheel sizes are for this style/year/model?
#2 - Is there any chance these would be a direct fit on my stock 2012 G37x Sedan? What would be needed? What tires should I run to keep from damaging my VSD?
If it's any help, i will never lower the car or install the higher end sport brakes.
I found an ad on craigslist for a set of 18" OEM wheels off of a 2004 G35 coupe. These arent from the ad, but the pic below is what they look like. I searched for hours last night but could not find anything on this particular wheel/car model combo.
Can someone help me out?
- The seller (a younger girl who doesn't seem to know much about cars) told me they were staggered widths 8"F and 8.5"R. Does that sound accurate? Two of the wheels have tires mounted on them (225/45/18) and the other two do not, which would make it tough for me to determine. Does anyone know if these are truly staggered and/or what true wheel sizes are for this style/year/model?
#2 - Is there any chance these would be a direct fit on my stock 2012 G37x Sedan? What would be needed? What tires should I run to keep from damaging my VSD?
If it's any help, i will never lower the car or install the higher end sport brakes.
Those wheels did come in staggered sets, but it's possible they could all be the same width, if you check the inside of the wheel there will be sizes stamped on the inside, like 18x8.0 or 18x8.5 and also should have the offset stamped as well, I think these were like a +35 give or take, might also be listed as ET35. These will work on your X but if they are a staggered set just be sure to run the same 245/45/18 size tire all around and you'll be fine, just keep the wider wheels in back. Those are a pretty nice looking OEM wheel IMO, should look nice on your G.
#2006
Registered User
Join Date: Aug 2017
Location: Las Cruces NM/ El Paso TX
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
18x9 +27
Hi, I recently acquired a 2012 6MT Sedan and am looking at replacing the "duckfeet" wheels on it soon. I've been doing some research and have read that some people have reported good success with 9.5" wheels in the 35-40 offset range with decent tires. I found a potential wheel I like that will poke out a little more and was hoping on some insight from someone that may have a similar setup:
18x9 +27 with a 265 series tire all around
I will probably drop it a bit with Tein Basis COs, but won't be slamming it or anything too crazy.
Thanks in advance.
18x9 +27 with a 265 series tire all around
I will probably drop it a bit with Tein Basis COs, but won't be slamming it or anything too crazy.
Thanks in advance.
#2007
Movin On!
iTrader: (13)
Hi, I recently acquired a 2012 6MT Sedan and am looking at replacing the "duckfeet" wheels on it soon. I've been doing some research and have read that some people have reported good success with 9.5" wheels in the 35-40 offset range with decent tires. I found a potential wheel I like that will poke out a little more and was hoping on some insight from someone that may have a similar setup:
18x9 +27 with a 265 series tire all around
I will probably drop it a bit with Tein Basis COs, but won't be slamming it or anything too crazy.
Thanks in advance.
18x9 +27 with a 265 series tire all around
I will probably drop it a bit with Tein Basis COs, but won't be slamming it or anything too crazy.
Thanks in advance.
I'm running 18x9.5 +38 on 245s front 285s back, your wheel edge will be about 5mm further out from mine. If you were to run those wheels I'd go no wider than a 255/45 or 255/40.
Here's a link to how my wheels were when I was running 245s all around, you'd be about 10mm closer to the fender edge running 255s on those 9 +27s. I'm dropped to zero gap on coilovers FWIW.
https://www.myg37.com/forums/18/2765...ml#post4044919
And how I'm now set up running same tires in front but 285s out back~
https://www.myg37.com/forums/18/2765...ml#post4135181
#2008
Im getting new rims for my g, either the AG m580 or niche surge directional rims. for the ag sizes are 19x8.5 front and 19x9.5 rears. and for the niche 20x8.5 front and 20x10 rears. whats a good offset to get flush fitment and will i run into clearance issues with any of these setups?
#2009
Movin On!
iTrader: (13)
Im getting new rims for my g, either the AG m580 or niche surge directional rims. for the ag sizes are 19x8.5 front and 19x9.5 rears. and for the niche 20x8.5 front and 20x10 rears. whats a good offset to get flush fitment and will i run into clearance issues with any of these setups?