Official~Best offsets for running FAT tires!
#1247
Premier Member
Being a coupe I imagine he will be fine... should have a little bit more space back there then our sedan's. Personally I went with the S-04's, have about 3500 miles on them and have no complaints. I didn't want to wait on PSS backorder at the time.
#1251
Got em mounted up and on the car finally. Ended up going with just the Pilot super sports. The PS4's are seemingly almost impossible to obtain right now in the 295/30/20 size.
Thank you for the help blnewt! The fitment of these were absolutely on point.
Here are a couple pictures:
Thank you for the help blnewt! The fitment of these were absolutely on point.
Here are a couple pictures:
#1253
Registered User
I've just gone through 10 pages and I give up.... I have an S sedan, looking to drop it on coilovers with 19s. I know how to choose offset and rim width to get flush.... just want to know what are the widest tires I can run without having to roll fenders or w/e. 255/285? I'm probably going to leave 1 finger gap all around.
#1254
Movin On!
iTrader: (13)
I've just gone through 10 pages and I give up.... I have an S sedan, looking to drop it on coilovers with 19s. I know how to choose offset and rim width to get flush.... just want to know what are the widest tires I can run without having to roll fenders or w/e. 255/285? I'm probably going to leave 1 finger gap all around.
I had a couple mm to the fender lip running camber at -1.0
Here's a link of that setup (i'm now running a square 18" setup)
https://www.myg37.com/forums/picture...ml#post3575335
Keep in mind the tires can run wider or narrower depending on brand and model. Most tire companies are good about listing their actual section widths so you can compare.
#1255
Registered User
Was running 295s in back on my zero-gap sedan, that was a 20x10+45.
I had a couple mm to the fender lip running camber at -1.0
Here's a link of that setup (i'm now running a square 18" setup)
https://www.myg37.com/forums/picture...ml#post3575335
Keep in mind the tires can run wider or narrower depending on brand and model. Most tire companies are good about listing their actual section widths so you can compare.
I had a couple mm to the fender lip running camber at -1.0
Here's a link of that setup (i'm now running a square 18" setup)
https://www.myg37.com/forums/picture...ml#post3575335
Keep in mind the tires can run wider or narrower depending on brand and model. Most tire companies are good about listing their actual section widths so you can compare.
#1256
Movin On!
iTrader: (13)
https://www.myg37.com/forums/wheels-...ml#post4036538
The following users liked this post:
ryandude2448 (12-08-2017)
The following users liked this post:
blnewt (05-17-2017)