20x10 wheels up front?
#1
Registered User
Thread Starter
iTrader: (4)
Join Date: Nov 2011
Location: Memphis, TN
Posts: 92
Likes: 0
Received 0 Likes
on
0 Posts
20x10 wheels up front?
Hey guys I've been trying to get this question answered for a few days now with no response and no luck finding anything...
I want to know how much turn radius is lost if 20x10 wheels are put up front of a G37S coupe?
Alot? Just a little? Not that noticeable?
Any and all help will be greatly appreciated guys. I just need to know what's up before i order new wheels.
I don't want to be that guy that takes 10min to get out of a parking spot because i have to constantly go back and forth to be able to turn lol
I want to know how much turn radius is lost if 20x10 wheels are put up front of a G37S coupe?
Alot? Just a little? Not that noticeable?
Any and all help will be greatly appreciated guys. I just need to know what's up before i order new wheels.
I don't want to be that guy that takes 10min to get out of a parking spot because i have to constantly go back and forth to be able to turn lol
Trending Topics
#8
Registered User
Thread Starter
iTrader: (4)
Join Date: Nov 2011
Location: Memphis, TN
Posts: 92
Likes: 0
Received 0 Likes
on
0 Posts
Sorry i thought i put the wheel specs in that last reply...
20x10 w/ +35 offset.
I don't have my own pics because i haven't ordered wheels yet.
It's the wheel specs that wilmington(spelling?) was running with his Stance SC-5's.
I pm'd him a few days ago with no response to the same question and i even asked it on the thread that the new buyer of his old wheel setup made a few days ago as well. I got nothing in response too.
20x10 w/ +35 offset.
I don't have my own pics because i haven't ordered wheels yet.
It's the wheel specs that wilmington(spelling?) was running with his Stance SC-5's.
I pm'd him a few days ago with no response to the same question and i even asked it on the thread that the new buyer of his old wheel setup made a few days ago as well. I got nothing in response too.
#10
Registered User
Thread Starter
iTrader: (4)
Join Date: Nov 2011
Location: Memphis, TN
Posts: 92
Likes: 0
Received 0 Likes
on
0 Posts
Still waiting and hoping to hear something...
I know some of u guys have run a setup like this or just be very knowledgeable in the area and it would be great if u would speak up...
I really want to order my wheels!
I pick up my new G37S coupe on monday 05/07/12 and have already started to order parts because i plan to have a lot done within the first week or two...
Coilovers, wheels, exhaust, intakes, and tint will all be done with a quickness and then possibly front lip & skirts after.
Please guys help me out so i can get this going
I know some of u guys have run a setup like this or just be very knowledgeable in the area and it would be great if u would speak up...
I really want to order my wheels!
I pick up my new G37S coupe on monday 05/07/12 and have already started to order parts because i plan to have a lot done within the first week or two...
Coilovers, wheels, exhaust, intakes, and tint will all be done with a quickness and then possibly front lip & skirts after.
Please guys help me out so i can get this going
#12
Registered User
Thread Starter
iTrader: (4)
Join Date: Nov 2011
Location: Memphis, TN
Posts: 92
Likes: 0
Received 0 Likes
on
0 Posts
Well im planning to do the deep concave all the way around like wilmington did with the sc-5's he was running...
I just wanted to make sure that running that 10in wide wheel in the front wouldnt dramatically limit my turn radius or start tearing up my tires...
I know most people run 20x9 up front but even with a good offset it still makes it look flat compared to the 20x10.5 in the rear imo...
I want to go the same route he did because i really don't think it would look that aggressive or compliment the car as much if i just did 20x10 w/ +35 all the way around
I just wanted to make sure that running that 10in wide wheel in the front wouldnt dramatically limit my turn radius or start tearing up my tires...
I know most people run 20x9 up front but even with a good offset it still makes it look flat compared to the 20x10.5 in the rear imo...
I want to go the same route he did because i really don't think it would look that aggressive or compliment the car as much if i just did 20x10 w/ +35 all the way around
#13
Registered User
Same ??????????
I logged on to ask the same question. I talked to a couple of vendors but didnt get much help (just said it would be aggresive). I also want to run the Stance SC-5 20x10 +35 on the front and 20x10.5 +27 on back. My only diffrence is its for a 2011 sedan and I have H&R springs. I know there is ALOT of members with ALOT more knowledge than me and we're just askin for a little guidance. Thanks in advance for any help.
#15
Registered User
Thread Starter
iTrader: (4)
Join Date: Nov 2011
Location: Memphis, TN
Posts: 92
Likes: 0
Received 0 Likes
on
0 Posts
Well so far i haven't heard anything negative so it looks like I'm about to go ahead and order the wheels i want then...
Thanks guys for taking the time to provide some info on this situation...
Please continue to do so if u have any other suggestions on this setup or tips or anything
Thanks guys for taking the time to provide some info on this situation...
Please continue to do so if u have any other suggestions on this setup or tips or anything