vossen cv3 help
#1
vossen cv3 help
hi im looking to buy a set of cv3s and im drop'd on eibach PK for AWD now i want a semi agressive look i dont want it to be too tucked i know the +20f+25r will look stupid with eibach pk drop what if i get +32f+45r vossen and add 15mm spacers all around will that make it semi flush without any rubbing or fender work? tires will be 245/35-20f 285/30-20r
2011 g37x Coupe
2011 g37x Coupe
Last edited by xsonnixx; 04-22-2012 at 12:41 AM.
#6
Former Sponsor
iTrader: (2)
You can also avoid running spacers up front and grab the +20 and for rear grab the +45 and run your 285/30/20 and add a 5MM spacer. Or you can mount in new studs out back with a 15MM spacer amd sit at +30 which would sit very flush, but you will need to possibly trim rear bracket going +30 to avoid rubbing.
Trending Topics
#8
You can also avoid running spacers up front and grab the +20 and for rear grab the +45 and run your 285/30/20 and add a 5MM spacer. Or you can mount in new studs out back with a 15MM spacer amd sit at +30 which would sit very flush, but you will need to possibly trim rear bracket going +30 to avoid rubbing.
#10
Former Sponsor
iTrader: (2)
Here you go, CV3s 20/45 with 245/35 and 275/30 but if you go 5mm spacer out back with 285/30 it would sit nice. Paul is slammed on KwV3s but with your Eibachs it woul sit nice as hell with the thick tires out back.
5MM Spacer will just slap on with no stud replacement required.
5MM Spacer will just slap on with no stud replacement required.