Official Vossen G37 Wheel Thread! Post Up!
#1141
Premier Member
iTrader: (13)
I had Falken 245/30 and 275/30 with H&R and rubbed. I had to run neg camber around -2.3 or so. and shave bumper bracket down to almost nothing. Then I didnt rub in rear but rubbed in front every great once in a while on recoil from speed bumps and such. It is a very nice set up once its dialed in.
#1144
So if I should be concerned about any rubbing would it be from upfront... also my local vossen retailer recommends 245/35 vs Diego's 30, maybe the 30 will help with clearance. Just want to get my shate right! hehe
#1149
#1151
#1152
I had Falken 245/30 and 275/30 with H&R and rubbed. I had to run neg camber around -2.3 or so. and shave bumper bracket down to almost nothing. Then I didnt rub in rear but rubbed in front every great once in a while on recoil from speed bumps and such. It is a very nice set up once its dialed in.
#1153
Premier Member
iTrader: (13)
Not in front. I dont remember what my front specs were. Here are some pics of the rear with Falken 275/30 on H and R drop.
**
**Here is how it was with 10.5 255/30 hankook
**and here is a 275/30 hankook at -2.5 but I sit lower than H and R on my coils
**here are +42 offset with 275/30
#1155
Registered Member
iTrader: (12)
Finally!
Finally I can post here with my new shoes. Well worth the wait for CV3's 20/45 245/35/20F 275/30/20R combo. Still have to wait for my black lugs as surprise surprise they are backordered Just have to complete the Eibach drop in the rear.
Now my G really needs a good detail and paint correction
Now my G really needs a good detail and paint correction
Last edited by Ontario G37S; 04-30-2012 at 03:31 AM.
The following users liked this post:
Vizard_87 (05-23-2014)