Official Vossen G37 Wheel Thread! Post Up!
#977
Registered User
I don't know if I'm comfortable running 15mm spacers. I might go with 5mm and 305s or maybe 285s... I know for sure I don't want to run too much camber. What were your specs with the 305s???
#978
Former Sponsor
iTrader: (2)
Specs with 305s were here:
25 7/8 rear ride height!
Camber was at -1.6
I understand the spacer situation but would give a awesome look and would not affect ride whatsoever as long as you torque down properly. Regardless your G37 looks great, just some options for the future to make it so much sweeter
Currently I'm runnung +20/25 with 245/275s and dropped my rear to 25 5/8 and still at -1.6 camber.
If you decide to go with either route you will not sacrifice camber! The front wheels are perfect but rears need to accommodate fronts a bit more by going 305s with a 5mm spacer or keep the 275s and push out to a +30 using a 15mm spacer.
I actually been toying with this exact set up and may go +20/45 with 255/305s next and only add a 5mm spacer on rear. It's a whole different look and feel vs what I currently have with my CV3s.
25 7/8 rear ride height!
Camber was at -1.6
I understand the spacer situation but would give a awesome look and would not affect ride whatsoever as long as you torque down properly. Regardless your G37 looks great, just some options for the future to make it so much sweeter
Currently I'm runnung +20/25 with 245/275s and dropped my rear to 25 5/8 and still at -1.6 camber.
If you decide to go with either route you will not sacrifice camber! The front wheels are perfect but rears need to accommodate fronts a bit more by going 305s with a 5mm spacer or keep the 275s and push out to a +30 using a 15mm spacer.
I actually been toying with this exact set up and may go +20/45 with 255/305s next and only add a 5mm spacer on rear. It's a whole different look and feel vs what I currently have with my CV3s.
Last edited by Diego@Vossen; 03-25-2012 at 06:25 AM.