Emillion45

Can you run this square setup:

20x10 ET 25
255/35/20

G37X Coupe

Diego@Vossen

iTrader: (2)

We offer a 20x10.5 +25 and clears fine but requires camber/stretched tire. We do not offer a 20x10 +25 so can't guarantee that will work.

Diego@Vossen

iTrader: (2)

if it is a non sport model yes it should be fine.

Emillion45

^^ Thanks D.

Why would it have to be a non S model? Brakes?

Diego@Vossen

iTrader: (2)

No sport brakes, you will not need to worry about hitting the caliper.

ViperG37s

Hello, I just want to ask if this set up I will get will be ok with my Moonlight White 2011 G37S. I am trying to get the Vossen CV5 20x10.5" all the way around with 265/30/20" tires. My car is lowered on H&R springs. Will these set up be ok on my car with no modifications needed like rolling the fenders, cutting brackets and putting on spacers... etc. I just needed some input on this before I close the deal in getting the wheels/tires. Also, for those that have run these set up did you have any problems noted later on or issues? One last thing ... can you pls post some pics with white G37 on Vossen CV5 wheels with 20x10.5 all the way around? ... Thank you in advance

Need 4 Speed

Viper a few pages back is a White and G37 coupe with those tires your thinking of yet dropped on coils I think...

Two Both Diego yet I have a Square set up as well.. 20x10.5 though he's a +1515 offset I'm at +2515 no issues... no fender rolling... only mod is trimming the liner and shave the bumper bracket is all... we are both real low.. and I have not one rub nor issue running this set up... I'm too once I wear out my 255/30's changing to the 265/30...

Swift is a nice drop and conservative you'll be fine IMO to run that set up...

What offset are you looking at getting?

Shoot me or Diego a pm we'd both be glad to help!

Viper look at page 137.... hes running a 275/30... nice... love that Set up on a white G

Btw... Diego car yet mine are also a few pages back.... enjoy!

Diego@Vossen

iTrader: (2)

Need 4 Speed

Love that Video Diego... Rolling Video shots... Sick!!! ;D

ViperG37s

Thank you. I plan on getting +25 offsets all the way around with CV5 20x10.5 with 255/30/20 tires but my car is lowered with H&R springs and it's really low, I only have about 1 finger gap between fenders and tires . I am concerned if it may not fit with what I am wanting to get. I love the flush concave look CV5 wheels. Do I have to shave the bracket and trim the liners or get cambers parts with this set up? Will this fit perfectly with no issues? Thanks

SkylineEX-S

https://www.myg37.com/forums/wheels-...10-5-45-a.html

My thread with 10.5+30 square setup.

Need 4 Speed

Thanks Skyline for posting up your G...

As for any lowered G yet running 20's some 19's you'll need to shave off the Bracket... Metal/plastic. Its a quick job and no worries.

As for running a Camber kit... I personally don't front nor rear... all I have is a rear toe bolt. I recently dropped mine even more and wow lol glad I did get it aligned right after ...
The Liner on the rear needs to be cut at the curve I used double sided tape to hold it... no issues.
I had a Camber kit in the rear and honestly the tech removed it due to it was cambering harder by pushing out the rim.
So in all save the money on the cambers and just get a toe bolt and done...
Running any of those two tires is fine..
Skyline's G is just Spot on! Shoot him a pm and ask...

Good luck!

Diego@Vossen

iTrader: (2)

niclacoste

What are the offsets for front and rear? My G-Sedan is also lowered on Tein H-Techs the mild drop and ride quality is perfect very stiff imo.

Diego@Vossen

iTrader: (2)

These are 20x9 +32 255/35/20 & 20x10.5 +45 285/35/20.