Tire size for Vossen 082 with Eibach
#18
Registered User
iTrader: (16)
Ok had it aligned today and very little to almost no rub till I turn and only rubs slightly on rear right! Because my fender liner seems to be hanging and sitting right on tire . I had the rear left slightly trimed and helped a lot now I'm happy and will probably have rear right also trimmed but currently not nearly as bad as yesterday! Like I said those liner in the fender looked like they are pulled down and they are sitting an inch or less close to tire
#19
Registered User
So Diego, I guess there's no way I would be able to squeeze a 10MM spacer into my rears with 285/30/20 coming from the 305's with no spacer if you're rubbing slightly with the 285's and a 39 offset. I spoke to Carlos as AutoGlitz and he told me there's no way I'd be able to put 10MM spacers unless they add more negative camber like I currently have with my 305's. I'm going for the flush look not the hella flush VIP look, so it's tough to get flush w/o stretching tires which is what I really don't want to do.
Thread
Thread Starter
Forum
Replies
Last Post