whiddles

iTrader: (2)

thanks for the info DON

donpisto

No prob. Anytime

VossenG37S

iTrader: (16)

Ok had it aligned today and very little to almost no rub till I turn and only rubs slightly on rear right! Because my fender liner seems to be hanging and sitting right on tire . I had the rear left slightly trimed and helped a lot now I'm happy and will probably have rear right also trimmed but currently not nearly as bad as yesterday! Like I said those liner in the fender looked like they are pulled down and they are sitting an inch or less close to tire

SteveG37

So Diego, I guess there's no way I would be able to squeeze a 10MM spacer into my rears with 285/30/20 coming from the 305's with no spacer if you're rubbing slightly with the 285's and a 39 offset. I spoke to Carlos as AutoGlitz and he told me there's no way I'd be able to put 10MM spacers unless they add more negative camber like I currently have with my 305's. I'm going for the flush look not the hella flush VIP look, so it's tough to get flush w/o stretching tires which is what I really don't want to do.

VossenG37S

iTrader: (16)

Yeah they did everything for me! I!would try a 5mm with 285 but gonnna be close. Remember my fender liner is hanging down for some reason? I don't want to run negative and right now it's flush and perfect

VossenG37S

iTrader: (16)

They did an awesome job ! 285 with my offsets sits perfect and won't change it now, just need spc front camber kit and good to go!!!