When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Oh right huh, I'll just have to 3m tape that sucker. Or I could leave part of the bracket on. I'll definitely let you know if that tire size works or not later this week hopefully
on a side note! my old setup was at +29 on 10.5 wheel wrapped with 285's on -3.2 camber but it was on yoko s drive which has a pretty thick sidewall. now i'm wondering if i try a 275 tire with less sidewall brand tire would that work.
on a side note! my old setup was at +29 on 10.5 wheel wrapped with 285's on -3.2 camber but it was on yoko s drive which has a pretty thick sidewall. now i'm wondering if i try a 275 tire with less sidewall brand tire would that work.
With your amount of camber and less sidewall it should work. But other than that I can't tell you much until I have my bracket shaved a little and put spacers on.
With your amount of camber and less sidewall it should work. But other than that I can't tell you much until I have my bracket shaved a little and put spacers on.
haha, my bracket is completely shaved off off! planning on having my body shop weld in a bracket later on if i ever go back to conservative wheel setup.
haha, my bracket is completely shaved off off! planning on having my body shop weld in a bracket later on if i ever go back to conservative wheel setup.
Nice! You're back to OEM rear bumper right? Does that sag at all? Or does 3M tape hold it up just fine?
I cut that bracket down to just the bolt everything else is gone and only rubs with people in the backseat
yeah, i should've done that instead. that time i was afraid the bolt itself would pop a tire so i completely shaved it all off lol. oh well, it can be fixed later on.
Originally Posted by emyrl
Nice! You're back to OEM rear bumper right? Does that sag at all? Or does 3M tape hold it up just fine?
i'm back on oem bumper. the 3m double sided tape holds it up perfectly. no sagging whatsoever.
I cut that bracket down to just the bolt everything else is gone and only rubs with people in the backseat
This! I shaved away everything and even hammered the steel lip back and then removed the bolt but kept it. So its as clear as it can be and still function.
This! I shaved away everything and even hammered the steel lip back and then removed the bolt but kept it. So its as clear as it can be and still function.
So your bolt is comoletly gone? I need to do this but I'm afraid of the bumper sagging or pooping off
02-13-2011, 03:34 AM
