VRG37S

iTrader: (59)

Hey I have 20x10.5 37mm offset Volk GT7s (From Forged Performance thanks sooooo much Sharif your the man bro)..........In the rear of my car...My car has Tanabe springs which only give like a .75-.8" drop in the rear fully settle..I have 275/30/20 in the rear and I want to know if its possible to go bigger..I want to fill the wheel well a little more and add a wider more aggressive tire while giving my rear lips more sidewall protection..The 275 is a little toooo stretched on a 10.5" wide wheel..Help is greatly appreciated guys..Thanks in advance

Jumpin800agl

iTrader: (1)

by rolling fender I would think you could fit a wider tire, say 285? 295 at extrem end? nOt totally sure on this though.

jedmonds

iTrader: (1)

BlackJack is running a 285 in the rear with the same offset on his GT30's. I am not sure what springs he is running, but I know it is lower than what the tanabe specifications are...

sTiLLBaLLiN37

iTrader: (9)

BJ is on H-techs.

NJlakeshoreG

iTrader: (1)

im on prokit and also ran on s techs on 285-25 on rear tires...i will be going 295 25 or 295 30 next tire change

VRG37S

iTrader: (59)

so 285/30/20s should be no problem for me then right?????? MIKE??????

VIP G

Damn man, I pushing the 275/30/19 on my stock rims, you should be able to fit the 305 if you wanted

VRG37S

iTrader: (59)

Yeah thats what MAXTOTHEG37 told me..That I should be able to fit 305/30/20s in the rear since im not dropped that much

g37mobbber

iTrader: (1)

i agree because i have 9.5 in the back with 275 and tanabe's so you should be able to put 295 or 305

VRG37S

iTrader: (59)

Thanks for your help man..Cant wait for the meet on the 13th...

g37mobbber

iTrader: (1)

i no man im excited!!

sTiLLBaLLiN37

iTrader: (9)

Get a room you two...LOL

GiGGaplease

get kumho tires. they are known for their thick sidewalls.

305/35/20

RedG37SNC

I have GT30's with 285/30 with Eibach drop and rub frequently on medium or greater bumps. Basically ever time I take the car out I rub. Waiting on my intake to do dyno's and get my fenders rolled and fender bolt grinded while at Forge.

The difference between an Eibach and Tanabe drop in the rear is .1 which suggests it's highly likely you'll rub without the mods above.

MaxToTheG37

iTrader: (3)

If you do the bracket grind you would be suprised at how my clearance that gives...