they all came in today..
oh yah.. thats a jp front lip on top of the 5 sets we got.

Thank you for the orders

 

Can the OEM Potenza RE050A fit on these RE30 19x9J+38 and 19x10J+38?

Another question about offset. I measured my OEM and got about:
11mm from tire to fender (front)
15mm from tire to fender (rear)

According to my calculations:
19x9+38 will stick out 11.35mm compared to OEM front
19x10+30 will stick out 19.7mm compared to OEM rear

So front seems ok but the rear seems a little too much. Am I wrong?

 

the rears are 19x10+35 offset.

 

its going to sit flush. my rims are 10.5+30 and it sticks out 1/2 inch from the fender.

amp, do you have a set of ta's or le's? price shipped to 70454 if you do.

 

the oem 245 rears will fit the fronts 19x9 with alittle stretch but you will need at least 275/35 for the 19x10

 

Yes, 10.5 is half inch bigger with +30 offset will stick out .5 inches
10 inch wide, with +35 offset will sit flush.

LE'S are discontinued, Did you mean the TE?

 

wassup dude jus wondering what color is your G?

 

Thanks for correcting. So it's even worse. It would stick out like 8mm or so then. Can these rear wheels be used even if you lower with like S TECH?

 

+35 offset means is 5 less than +30. yes in terms of offset, numbers are reversed.

 

nah, i meant the le's. like to have some lip. i know theyre discontinued but there still out there.

 

OK. Flush is good for me. Are you lowered with those?

 

fkat at 35mm offset with a 10" wide rim it'll be 23mm from where your rims are now

 

I agree with you. (9*25.4/2-45) - (10*25.4/2-35) = 22.7
I measured around 15mm on my stock so I said it would stick out about 8mm. So this RE30 won't be flush and if I lower the car then I might rub and maybe have to cut some felt off. I wanted to know that I'm thinking correctly.

 

nope i am not lowered. if i want to lower, i would really have a negative camber. 2 finger gap in the rear, 3 fingers gap in the front. so its not that bad.

 

i'm tucking 275/35 in the rear 245/40 fronts at less then a finger....with my re30s i'm going 285/30 rear and 255/35 fronts....no probs.....hardly any camber in the rear with my 275