The "4 door Z" build (4DRZ)- 13 G37S 6spd sedan
#496
I just ordered the RJM clutch pedal system. (Thanks for the advice Rochester)
I feel like I can drive the car very smoothly 98% of the time w/ the Jsolo spring, but there are always those awkward 1st gear starts when you don't get the timing exactly perfect and you look like it is your 1st time driving stick shift. I figured getting rid of this along with saving a bit of wear on the throw out bearing and the fact I will have the driver's seat out soon made enough sense to get the part. Looks like it ships out at the end of the week and should be here probably next week.
I have not read through them entirely yet, but the installation instructions look pretty lengthy for what looks to be a relatively simple part.
I feel like I can drive the car very smoothly 98% of the time w/ the Jsolo spring, but there are always those awkward 1st gear starts when you don't get the timing exactly perfect and you look like it is your 1st time driving stick shift. I figured getting rid of this along with saving a bit of wear on the throw out bearing and the fact I will have the driver's seat out soon made enough sense to get the part. Looks like it ships out at the end of the week and should be here probably next week.
I have not read through them entirely yet, but the installation instructions look pretty lengthy for what looks to be a relatively simple part.
#497
Administrator
iTrader: (9)
I just ordered the RJM clutch pedal system. (Thanks for the advice Rochester)
I feel like I can drive the car very smoothly 98% of the time w/ the Jsolo spring, but there are always those awkward 1st gear starts when you don't get the timing exactly perfect and you look like it is your 1st time driving stick shift.
I feel like I can drive the car very smoothly 98% of the time w/ the Jsolo spring, but there are always those awkward 1st gear starts when you don't get the timing exactly perfect and you look like it is your 1st time driving stick shift.
Before getting the RJM, I used to mock the rationale as akin to performing major surgery (RJM) when all you needed was a $20 Band-aid (jsolo's spring). However, I was completely, arrogantly wrong. FWIW
#498
Registered Member
iTrader: (3)
I installed the RJM pedal on Sunday. Instructions are lengthy, but detailed.
It's actually pretty simple. Remove pedal assembly. Swap parts over. Reinstall.
The blue plastic stopper was tough to get out, and getting the upper firewall bolt in was also a pain. Note the plugs (cruise and depress to start) will interchangeably plug into the different switches.
It's much smoother, but takes getting use to--almost like a new car!
It's actually pretty simple. Remove pedal assembly. Swap parts over. Reinstall.
The blue plastic stopper was tough to get out, and getting the upper firewall bolt in was also a pain. Note the plugs (cruise and depress to start) will interchangeably plug into the different switches.
It's much smoother, but takes getting use to--almost like a new car!
#500
Administrator
iTrader: (9)
https://www.myg37.com/forums/g37-sed...ml#post3933567
Can't believe it's been two years already. Damn.
#501
I don't have numbers on mine. So, IDK. Here's the review I did on this after the install:
https://www.myg37.com/forums/g37-sed...ml#post3933567
Can't believe it's been two years already. Damn.
https://www.myg37.com/forums/g37-sed...ml#post3933567
Can't believe it's been two years already. Damn.
#502
I splurged on the car today and picked up a 10 pack of crush washers for my oil drain plug after changing the oil yesterday. This will last me 5 years. As my father would say, "Another $1.58 shot to hell!"
I also switched from regular Mobil 1 to Mobil 1 Extended Performance because it claims to be slightly better with heat. This could be good for me on track days, but the G in general since the engine seems to run hot. I guess they have some guarantee for 15,000 miles on this oil from Mobil, but that would be almost 3 years for me- way too long.
I also switched from regular Mobil 1 to Mobil 1 Extended Performance because it claims to be slightly better with heat. This could be good for me on track days, but the G in general since the engine seems to run hot. I guess they have some guarantee for 15,000 miles on this oil from Mobil, but that would be almost 3 years for me- way too long.
Last edited by 4DRZ; 10-06-2017 at 04:27 PM.
#504
Administrator
iTrader: (9)
Most things are like that. Even the 4.083 gears, believe it or not. That particular mod took well over a month before everything felt normal again. Still, there are moments when my eyes go wide. Usually its when I haven't driven the car in a number of days.
Unlike the STS, which is something you feel and appreciate every single time you touch the shifter.
#505
It will happily become the new normal pretty quick, 4DRZ. A couple of weeks from now you'll probably wonder what all the fuss was about.
Most things are like that. Even the 4.083 gears, believe it or not. That particular mod took well over a month before everything felt normal again. Still, there are moments when my eyes go wide. Usually its when I haven't driven the car in a number of days.
Unlike the STS, which is something you feel and appreciate every single time you touch the shifter.
Most things are like that. Even the 4.083 gears, believe it or not. That particular mod took well over a month before everything felt normal again. Still, there are moments when my eyes go wide. Usually its when I haven't driven the car in a number of days.
Unlike the STS, which is something you feel and appreciate every single time you touch the shifter.
#506
I have been having some pretty serious issues with my Z1 tune for their 400hp kit. The car easily goes into limp mode above 5K rpm or bogging the engine below 2K rpm. The second time it happens a CE light goes on and a code for a MAF sensor comes on.
The other issue is Jon at Z1 as it is almost impossible to get through to him, you get put on hold for extended periods, he never calls you back and he never sends the cable he says he will to diagnose the problem. Last week he was finally honest about the fact he did not have any cables so I bought one that he said I could return. It finally arrived. Hopefully, we can get to the bottom of this quickly so I can drive my car normally again.
The other issue is Jon at Z1 as it is almost impossible to get through to him, you get put on hold for extended periods, he never calls you back and he never sends the cable he says he will to diagnose the problem. Last week he was finally honest about the fact he did not have any cables so I bought one that he said I could return. It finally arrived. Hopefully, we can get to the bottom of this quickly so I can drive my car normally again.
#507
Administrator
iTrader: (9)
Does he know that you're writing about this experience online? I bet he doesn't.
Good luck, 4DRZ. Is the next worse case scenario an in-person dyno-tune? Or would the next thing be eating this as a loss and starting over with EcuTek?
Good luck, 4DRZ. Is the next worse case scenario an in-person dyno-tune? Or would the next thing be eating this as a loss and starting over with EcuTek?
#508
I have a tuner not too far away who does Uprev tunes. That would be the next step. EcuTek is at least a 5 hour drive for me and probably not really worth it unless the Uprev tuner in Wisconsin is no good- unlikely as they seemed pretty sharp when I talked to them.