Q60 Red Sport Rims on G37S Coupe
#1
Registered Member
Thread Starter
Q60 Red Sport Rims on G37S Coupe
Curious to see if anyone has done this yet. I have a 2012 sport coupe on stock wheels and I think that these wheels would look great on our cars. The wheels are a nice dark grey color plus the rears are 19x9.5 which is wider than my current stock wheels. Anyone have any offset specs on these? I wonder if they would fit and if they would look a little more aggressive.
#2
Movin On!
iTrader: (13)
Those look to be the same as the Q50 RedSport set, and the Sedan runs 265/35/19s in back. Haven't been able to find the specs but they're typically real conservative on the offset, so expect something like a +45 to +50 range. Nice looking wheel IMO.
2016 Infiniti Q50 Red Sport 400 First Drive Review - Motor Trend
Might shoot a PM to Kirk (the OP in this thread) he might be of help
https://www.myg37.com/forums/build-t...red-sport.html
2016 Infiniti Q50 Red Sport 400 First Drive Review - Motor Trend
Might shoot a PM to Kirk (the OP in this thread) he might be of help
https://www.myg37.com/forums/build-t...red-sport.html
The following users liked this post:
TooKool (01-24-2017)
#3
Registered Member
Thread Starter
Thanks blnewt! I also sent an email to the local dealership asking about the wheel specs and how much a set would cost. I'm sure the price is going to be ridiculous. Hopefully someone on this forum has already done this swap and will post pics...
#6
Registered Member
Thread Starter
I recieved a quote from my local dealer and they are pricey (almost $950 a wheel). However I found a website or 2 online that offer sets for about $750 a wheel. Has anyone seen a better price?
Trending Topics
#10
Registered Member
They will fit and probably look okay. The cars are not too much different in style but just be prepared to run a spacer. Which you probably want to anyway to get it closer to the fender and/or not hit the upper control arm. I have the 2016 Q60 rims 19x9 on my G37 sedan and the only clearance problem is the front caliper so I put a 10mm hubcentric spacer there
I would try to find a member on the Q60 forum in your area see if they will let you try on a wheel on
I would try to find a member on the Q60 forum in your area see if they will let you try on a wheel on