Project Practicality
#32
Love your setup with the Nismo Z rims.
Are you running square fronts? Any spacers?
More photos of the fitment please?
How does the driving balance change when going from staggered OEM -> square?
Looking good and keep up the good work!
Are you running square fronts? Any spacers?
More photos of the fitment please?
How does the driving balance change when going from staggered OEM -> square?
Looking good and keep up the good work!
#33
Registered Member
Thread Starter
I noticed zero difference going square. I doubt many people would. There's such a small stagger originally anyway.
The following users liked this post:
p0on (10-10-2018)
#35
Registered Member
Thread Starter
#36
Registered Member
Thread Starter
Getting ready for winter.
Got the coupe wheels wrapped in some Michelin X ice winter tires.
Also cleaned, clay bar'd and waxed them up.
Lookin spanky.
Got the coupe wheels wrapped in some Michelin X ice winter tires.
Also cleaned, clay bar'd and waxed them up.
Lookin spanky.
Last edited by Dembflyr; 09-26-2016 at 01:29 PM.
#37
Administrator
iTrader: (9)
Very nice. I do that, too, with my winter wheels, and have been meaning to get to them soon. You beat me to it! Although truth be told, the inner lip of my duckfeet look like pooh.
I'm needing two new rear snows, and have also decided on X-Ice this time around.
I'm needing two new rear snows, and have also decided on X-Ice this time around.
#39
Administrator
iTrader: (9)
Do you use spacers on those Coupe 18"s after the drop? I put 15mm adapters on for winter... third year coming up. Which is something else to clean pre-season.
If you do use spacer adapters, I strongly recommend buying some half-height spline-drive lug nuts, instead of using the little brass lugnuts that come with the typical set. The brass nuts tend to strip soon as you look at them.
If you do use spacer adapters, I strongly recommend buying some half-height spline-drive lug nuts, instead of using the little brass lugnuts that come with the typical set. The brass nuts tend to strip soon as you look at them.
#42
Registered Member
Thread Starter
I installed the Cusco bar today.
I had to paint the brackets copper.
Also removed the headliner so it doesn't rub. I am thinking about adding an aftermarket liner but I'm not set on it at the moment.
If I only had a good camera these might look better.
I have the vinyl to black out the window trim. Just need to find the time to do it.
I had to paint the brackets copper.
Also removed the headliner so it doesn't rub. I am thinking about adding an aftermarket liner but I'm not set on it at the moment.
If I only had a good camera these might look better.
I have the vinyl to black out the window trim. Just need to find the time to do it.
The following users liked this post:
Dembflyr (10-27-2016)
#45
Registered Member
Thread Starter
I played around with my cheap iPad app again. I'm trying to decide what to do with my front grill down the road so I'm trying out some things.