Official Low Offset/Hellaflush Thread
#2101
A 10.5 width and -2 offset is going to be a tight squeeze in the front even with a lot of camber. I'm on a 20x10.5 with +10 offset in the front and it was a really tight squeeze until I got some "natural roll" going. I'm tucking the very top tread of the tire with no camber arms up front just for reference.
#2102
Movin On!
iTrader: (13)
A 10.5 width and -2 offset is going to be a tight squeeze in the front even with a lot of camber. I'm on a 20x10.5 with +10 offset in the front and it was a really tight squeeze until I got some "natural roll" going. I'm tucking the very top tread of the tire with no camber arms up front just for reference.
#2106
It's bit on the aggresive side. You will have to shave the rear bumper bracket almost completely off or add some camber. I shaved mine down, removed the screw and bent it up. I was either remove the screw completely or add camber, I chose the former.
#2107
Registered Member
iTrader: (1)
I am not 100% sure i'll have to. I am 19x 10.5 and I would only drop on eibachs. I think the extra size of 20's is why you had to. At best i'll have to remove the fender liners in the rear, and worst I do like you did and grind some ish down. I don't wanna add camber either so I feel ya
#2108
Registered User
iTrader: (2)
Got a killer deal on some Zedd wheels off CL. I had planned on going with some Works VSXX but these are a lot cheaper and look pretty damn good in my opinion
Setup
Zedd SLM Wheels (finish hyper grey)
19x9.5 +22 offset Front
19x11 +25 offset Rear
Had to use a 15mm spacer up front to clear the BBKs, no spacers needed for the rear
Tires
Nitto Motivo
245/40 Front
275/35 Rear
I get slight rubbing when I'm going 80+ on the highway and hit a dip in the road. I also get slight rubbing when i'm crusing through town and hit a big enough dip. I'm taking my car to get the fenders rolled tomorrow to hopefully stop the rubbing. I'll up date once it get it done how its working out. Here are some pictures of the wheels
Setup
Zedd SLM Wheels (finish hyper grey)
19x9.5 +22 offset Front
19x11 +25 offset Rear
Had to use a 15mm spacer up front to clear the BBKs, no spacers needed for the rear
Tires
Nitto Motivo
245/40 Front
275/35 Rear
I get slight rubbing when I'm going 80+ on the highway and hit a dip in the road. I also get slight rubbing when i'm crusing through town and hit a big enough dip. I'm taking my car to get the fenders rolled tomorrow to hopefully stop the rubbing. I'll up date once it get it done how its working out. Here are some pictures of the wheels
#2109
I am not 100% sure i'll have to. I am 19x 10.5 and I would only drop on eibachs. I think the extra size of 20's is why you had to. At best i'll have to remove the fender liners in the rear, and worst I do like you did and grind some ish down. I don't wanna add camber either so I feel ya
#2110
Registered Member
iTrader: (1)
you need smaller tires and a major drop
you don't fit in this thread lol
you don't fit in this thread lol
Got a killer deal on some Zedd wheels off CL. I had planned on going with some Works VSXX but these are a lot cheaper and look pretty damn good in my opinion
Setup
Zedd SLM Wheels (finish hyper grey)
19x9.5 +22 offset Front
19x11 +25 offset Rear
Had to use a 15mm spacer up front to clear the BBKs, no spacers needed for the rear
Tires
Nitto Motivo
245/40 Front
275/35 Rear
I get slight rubbing when I'm going 80+ on the highway and hit a dip in the road. I also get slight rubbing when i'm crusing through town and hit a big enough dip. I'm taking my car to get the fenders rolled tomorrow to hopefully stop the rubbing. I'll up date once it get it done how its working out. Here are some pictures of the wheels
Setup
Zedd SLM Wheels (finish hyper grey)
19x9.5 +22 offset Front
19x11 +25 offset Rear
Had to use a 15mm spacer up front to clear the BBKs, no spacers needed for the rear
Tires
Nitto Motivo
245/40 Front
275/35 Rear
I get slight rubbing when I'm going 80+ on the highway and hit a dip in the road. I also get slight rubbing when i'm crusing through town and hit a big enough dip. I'm taking my car to get the fenders rolled tomorrow to hopefully stop the rubbing. I'll up date once it get it done how its working out. Here are some pictures of the wheels
#2112
Your current tire size is for the Official Aggressive Offsets & FAT Tires thread.
Last edited by That Dude; 07-14-2016 at 01:11 PM. Reason: typos
#2114
Wheel experts help needed
I recently purchased some work wheels Xsa 04C
The specs are
19x10.5+10
19x11.5+10
My question is what size of tires should I put on and which brand I know I will have to stretch the tires and roll the fenders.
I have stance coilovers I'm waiting on my camber arms rear camber arms and rear toe arm as soon as my parts arrived I'm gonna put everything together and also do an alignment.
Any suggestions
Thanks
The specs are
19x10.5+10
19x11.5+10
My question is what size of tires should I put on and which brand I know I will have to stretch the tires and roll the fenders.
I have stance coilovers I'm waiting on my camber arms rear camber arms and rear toe arm as soon as my parts arrived I'm gonna put everything together and also do an alignment.
Any suggestions
Thanks
The following users liked this post:
denys (07-18-2016)