Wheel adapters
#6
Registered Member
I'm running a set of 5x130 19mm adapters without issue. Been on the car 2-3 years now I think. I would make sure the new wheels have the little pockets on the mating surface for your stock studs, because those will most likely stick out past the adapter (my experience at least). I had some hubcentric ones made to match the bore on my wheels and car. No issues at all. Picked them up here: Wheel Adapters, Wheel Spacers, Hub Centric Rings | Motorsport Tech
#7
My problem seems to be the thickness of the adapter will throw the offset to low and I am afraid the wheels will stick out. They are 42 offset, and the adapter is 1.25 inches (32mm), which will leave me with a +9 offset which is way to low. I am looking for at least a 25 offset in the rear. So I think I am going to pass on a great deal.
Trending Topics
#8
Movin On!
iTrader: (13)
My problem seems to be the thickness of the adapter will throw the offset to low and I am afraid the wheels will stick out. They are 42 offset, and the adapter is 1.25 inches (32mm), which will leave me with a +9 offset which is way to low. I am looking for at least a 25 offset in the rear. So I think I am going to pass on a great deal.
Thread
Thread Starter
Forum
Replies
Last Post
VMRWheels
Wheel & Tires
4
04-04-2016 07:15 PM
G37X GraSdadow
Wheels & Tires
7
03-31-2016 03:40 PM