Mark this thread as Unsold
FS D2 Coilovers 2008-up
#1
Registered User
Thread Starter
iTrader: (1)
Join Date: May 2008
Posts: 21
Likes: 0
Received 0 Likes
on
0 Posts
D2 Coilovers 2008-up
Category: Steering & Suspension
Price: $650
Private or Vendor Listing: Private Listing
Part fits: 2008-2009 G37 Coupe
Location (State/Prov): NC
Item Condition: Used
Last edited by jaydm24; 01-25-2011 at 04:36 PM.
Trending Topics
#10
Registered User
iTrader: (1)
These are unlike any coilovers I have seen for the G/Z. Are you sure these worked? Our rear suspension has the coils seperate from the struts. Mounting the springs on the struts loads the weight of the suspension on a strut tower thats not made to support weight? What goes in the spring bucket mount then? Somethings off here. PLease post installed pics!!!
edit!!!!! I stand corrected! after doing a little research and I guess there are full rear coilvoers for the G/Z. Just never saw them before and I have installed several coilovers and springs on Zs. How did these ride?
edit!!!!! I stand corrected! after doing a little research and I guess there are full rear coilvoers for the G/Z. Just never saw them before and I have installed several coilovers and springs on Zs. How did these ride?
Last edited by jmlenz; 01-10-2011 at 12:17 AM.
#15
Registered User
Thread Starter
iTrader: (1)
Join Date: May 2008
Posts: 21
Likes: 0
Received 0 Likes
on
0 Posts
This is straight from their website.
The RS coilover system is a 36 way dampner and rebound adjustable monotube full coilover system. The setup has seperate height and preload adjustments allowing for optimal adjustment and allowing full strut travel at all times along with pillowball upper mounts or top mounts*. Mounts are constructed of 6061 powder coated aluminum. Threads are teflon coated to prevent rust. Rebuildable and serviceable in the US.
The RS coilover system is a 36 way dampner and rebound adjustable monotube full coilover system. The setup has seperate height and preload adjustments allowing for optimal adjustment and allowing full strut travel at all times along with pillowball upper mounts or top mounts*. Mounts are constructed of 6061 powder coated aluminum. Threads are teflon coated to prevent rust. Rebuildable and serviceable in the US.