Zinc

Kudos on the rim choice. They look great on your ride!

adihere

hey IgS did you need to get any chamber/toe kits on that drop for the x? how is your alignment?? thx!

J2S2M

iTrader: (22)

Sedan Spoiler for Sale

^ This rear OEM spoiler would set things off nicely.

enforcer

That CF overlay is very hard to bend over the curves and it comes undone at the sharp corners. Good work.

IgS

iTrader: (16)

I have the rear camber kit on, but my specs are way out. i got -2.1 in the front and -2.4 in the rear. I got my alignment at NTB and they arent the brightest bunch at this shop, so im thinking they didn notice that i had adjustable camber in the back... so ill be going there again and will report back.

Yea thanks, i was looking at that, too bad it has the rear camera opening, and i dont have that feature

IgS

iTrader: (16)

Ugh, yes it does! The shifter has held up really well surprisingly, but its actually started to come a bit off on the center by the screen. So i need to do something about that.

I was thinking paint it flat black, and the remainder of the aluminum in gloss black? - in my head it looks good, but not sure if that will translate well into real life

csnpsu

I love those wheels, does anyone have them on a G Coupe?? Please post pics!!!!

Clutchr6

very clean and nice choice of wheels looks classy

ice350

The car looks nice but stockish.
I've tried re-drilled wheels twice and neither time did the car ride right. The steering was loose and pulled to one side. I hope it works out for youi.

onthelimit

those wheels are money on the G

D_Nyholm

iTrader: (2)

Those wheels look great! And the drop doesn't look that low considering they are eibach! Did you NEED the slight stretch to the tires or are they not even close to rubbing? I think they offer +38 or +45 as well, would you have gone with them? Did you get them through supreme power? I'm thinking of getting some vmr wheels redrilled as well, but am unsure about the offset to go with.

IgS

iTrader: (16)

I dont think i NEEDED the stretch, it just worked out that way. I had the 245/40/19 tires from my last wheel set and i just put them on these. These were wider with the 9.5 width so it stretched a bit. You can probably go for a 255 tire, but i would do some research as far as how they look on a 9.5 wide rim. If i had to do it over again, i would still go with the same size tires.

I think the offset i went with is perfect as both wheels are flush with the body, if i would have chosen a higher offset they would sit in a little more and wouldnt look as nice, so im happy with my choice.

I got them through ModBargains last summer, they were pretty easy to work with, just give them a call. I think they should have VMR wheels as well.

good luck!

D_Nyholm

iTrader: (2)

They look awesome. So, last question. If the car wasn't lowered, they would probably stick out a little? I'm asking since I don't plan on lowering. While I'd like to, if I did lower, I'd only want to drop .75" at most, and no one seems to offer that

IgS

iTrader: (16)

Yes, they will stick out if its at stock height.

you can use this link and compare the wheel/tire combos you might be considering.
Custom rims, wheel tire packages for your ride - RIMSnTIRES.com

just take a ruler to your wheel right now and see how much more you can get.

i lowered my car before i got the wheels so i measured how much more i can get and then played around with the calculator in the above link to get the dimensions of the wheel and the offset that suited me well.

It also helps to look through the forum to see the wheel combos people use and what specs they have. You might just come to a combination you like without doing any calculating yourself

SRG

iTrader: (8)

great looking car and some great mods you've done there....ehhh not crazy about Tiesto's Club Life Podcast....you should start checking out some real podcasts =) like mine in itunes! hahaha