Last pics of lp g slammed on vossen cv1!!!!
#35
Registered Member
iTrader: (2)
Looks Great dude!
Just a note... The rear looks a bit negative.. when you go from say -2.4 to say -1.2(with installed camber kits) you ll see that the top of the rim will come closer to the fender line. I would not go with a 15MM rear maybe 5 at most.. For that sell your rims and get them with that offset in mind.
IMO for the best look you want it flush with fender line. Aggressive offsets on a lowered car IMO look better with done with the tires than with the rims, but going an aggressive offsets has its drawbacks like having to:
a) run stretched tires
b) run a lot of negative camber
c) Adjust coils rebound(if you have this) so it doesn't hit tires <- not good for high speed driving)
Just a note... The rear looks a bit negative.. when you go from say -2.4 to say -1.2(with installed camber kits) you ll see that the top of the rim will come closer to the fender line. I would not go with a 15MM rear maybe 5 at most.. For that sell your rims and get them with that offset in mind.
IMO for the best look you want it flush with fender line. Aggressive offsets on a lowered car IMO look better with done with the tires than with the rims, but going an aggressive offsets has its drawbacks like having to:
a) run stretched tires
b) run a lot of negative camber
c) Adjust coils rebound(if you have this) so it doesn't hit tires <- not good for high speed driving)
#36
Looks Great dude!
Just a note... The rear looks a bit negative.. when you go from say -2.4 to say -1.2(with installed camber kits) you ll see that the top of the rim will come closer to the fender line. I would not go with a 15MM rear maybe 5 at most.. For that sell your rims and get them with that offset in mind.
IMO for the best look you want it flush with fender line. Aggressive offsets on a lowered car IMO look better with done with the tires than with the rims, but going an aggressive offsets has its drawbacks like having to:
a) run stretched tires
b) run a lot of negative camber
c) Adjust coils rebound(if you have this) so it doesn't hit tires <- not good for high speed driving)
Just a note... The rear looks a bit negative.. when you go from say -2.4 to say -1.2(with installed camber kits) you ll see that the top of the rim will come closer to the fender line. I would not go with a 15MM rear maybe 5 at most.. For that sell your rims and get them with that offset in mind.
IMO for the best look you want it flush with fender line. Aggressive offsets on a lowered car IMO look better with done with the tires than with the rims, but going an aggressive offsets has its drawbacks like having to:
a) run stretched tires
b) run a lot of negative camber
c) Adjust coils rebound(if you have this) so it doesn't hit tires <- not good for high speed driving)
#42
Registered User
Join Date: Feb 2011
Location: Houston, Tex
Posts: 367
Likes: 0
Received 0 Likes
on
0 Posts
Borla? I havent seen many peeps have that type of set up. I would go with ARK imo