It's On! Eibach Pro-Kit
01-11-2009, 09:21 PM
#63
Registered User
Thread Starter
iTrader: (1)
Join Date: Apr 2008
Location: ۞ DALLAS ۞
Posts: 5,066
Likes: 0
Received 0 Likes
on
0 Posts
Nobody is complaining. It wasn't a road. It was a parking lot. That particular part of town has horrible curbs and parking lots. The guy that was behind me scraped too and he has a stock G35 Coupe.
Last edited by elite; 01-11-2009 at 09:51 PM.
01-12-2009, 08:00 PM
#65
Registered User
iTrader: (1)
Join Date: Apr 2006
Location: jacksonville, fl
Posts: 4,563
Likes: 0
Received 0 Likes
on
0 Posts
My results are posted here: https://www.myg37.com/forums/brakes-...f-results.html. Post #25 and #29 are most relavent. Measurements are in #25.
Hope that helps.
Hope that helps.
01-13-2009, 12:32 PM
#67
Registered User
iTrader: (1)
Join Date: Oct 2005
Location: NY
Posts: 643
Likes: 0
Received 0 Likes
on
0 Posts
Update: I bottomed out last night in a horrible parking lot.
Checked under the car today and decided to take a couple of pics
and measure using a mans measuring tool.
No injuries
A full 6 days have passed since install.
This car is getting a lot lower than expected. You can barely see the top of the front tires. No regrets.
*Dr. Pepper was tasty.
Checked under the car today and decided to take a couple of pics
and measure using a mans measuring tool.No injuries
A full 6 days have passed since install.
This car is getting a lot lower than expected. You can barely see the top of the front tires. No regrets.
*Dr. Pepper was tasty.
thats the only thing i scrape on
, and im dropped on s-techs, a new exhaust would take care of that
01-13-2009, 06:15 PM
#68
Registered User
iTrader: (1)
Join Date: Apr 2006
Location: jacksonville, fl
Posts: 4,563
Likes: 0
Received 0 Likes
on
0 Posts
ah boo. did you get toe arms though? like i said, its more important for me to get my toe into spec. some neg camber wont wear tires that much faster.
01-13-2009, 08:20 PM
#69
There is also #72265 and #7.72265K which is just the toe bolts.
So get #72260 version and you will be good.
01-14-2009, 12:12 AM
#70
Registered User
Thread Starter
iTrader: (1)
Join Date: Apr 2008
Location: ۞ DALLAS ۞
Posts: 5,066
Likes: 0
Received 0 Likes
on
0 Posts
SPC part #72260, which is the same as Eibach #5.72260K, includes both the camber adjustment arm and the toe bolts. Now you have to be careful when looking at the two web sites. The pictures are accurate on the SPC site and wrong on the Eibach site.
There is also #72265 and #7.72265K which is just the toe bolts.
So get #72260 version and you will be good.
There is also #72265 and #7.72265K which is just the toe bolts.
So get #72260 version and you will be good.
Ham is right.
Thread
Thread Starter
Forum
Replies
Last Post
optikol
Private Classifieds
2
01-28-2016 07:31 PM
