Rim Repair?
#1
Registered User
Thread Starter
iTrader: (1)
Join Date: Apr 2005
Location: In a Big Azz House!!!
Posts: 1,572
Likes: 0
Received 0 Likes
on
0 Posts
Rim Repair?
Long Story Short, I went to get a wheel/tire balance and I was informed that one of my wheels were slightly bent.
Does anyone have the #/location of a place who does rim repair at a reasonable price. I would prefer the VA area if possible. Thanks.
Does anyone have the #/location of a place who does rim repair at a reasonable price. I would prefer the VA area if possible. Thanks.
#2
Registered User
iTrader: (6)
Join Date: Jul 2006
Location: Southern Maryland
Posts: 207
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by KlokDeezal
Long Story Short, I went to get a wheel/tire balance and I was informed that one of my wheels were slightly bent.
Does anyone have the #/location of a place who does rim repair at a reasonable price. I would prefer the VA area if possible. Thanks.
Does anyone have the #/location of a place who does rim repair at a reasonable price. I would prefer the VA area if possible. Thanks.
J/K... NATIONAL WHEEL REPAIR WALDORF, MD, AND ANOTHER LOCATION IN VA. I HAVE MINE IN THE SHOP; ALL 4 ARE BENT. INSURANCE WILL COVER IT, FOR 20'S $150 EACH, I THINK $130 FOR 19'S
301-638-0075 2586 OLD WASHINGTON RD WALDORF, MD
I GET MINE BACK ON FRIDAY. GOODLUCK MAN
#4
Registered User
Thread Starter
iTrader: (1)
Join Date: Apr 2005
Location: In a Big Azz House!!!
Posts: 1,572
Likes: 0
Received 0 Likes
on
0 Posts
Ok here is the update,
I took my wheel to National Wheel repair today and they took off the tire/wheel and found that I have 2 bends in the wheel and they are on opposite sides. One bend is right above the spoke and the other is on the back end.
They inspected and told me that it was a risk to touch because the wheel looked like it had been "stressed" enough and if they pulled on it, that it might start to leak air while I am driving and I would have to refill it every 30-45min.
Has anyone ever had this happen to them. The only other option I have is to order a new wheel. Does anyone know of any other options that might be available to me before I go down that route?
I took my wheel to National Wheel repair today and they took off the tire/wheel and found that I have 2 bends in the wheel and they are on opposite sides. One bend is right above the spoke and the other is on the back end.
They inspected and told me that it was a risk to touch because the wheel looked like it had been "stressed" enough and if they pulled on it, that it might start to leak air while I am driving and I would have to refill it every 30-45min.
Has anyone ever had this happen to them. The only other option I have is to order a new wheel. Does anyone know of any other options that might be available to me before I go down that route?
Trending Topics
#8
Originally Posted by KlokDeezal
^This coming from the guy who has the slowest 'G' in the club
He loses to everyone
He loses to everyone
All those mods do is make your wheel wobble more lol
#10
Registered User
Join Date: Jul 2005
Location: University of Maryland
Posts: 3,922
Likes: 0
Received 0 Likes
on
0 Posts
plastic wheels with cheap chrome paint are bound to bend sooner or later, sooner than later , sike naw, good luck man, i hear nothing but good things about ye old wheel shoope
#11
Registered User
Thread Starter
iTrader: (1)
Join Date: Apr 2005
Location: In a Big Azz House!!!
Posts: 1,572
Likes: 0
Received 0 Likes
on
0 Posts
Well my final decision after looking at everything I could do is to basically order a new wheel. It should be here in about 1 wk. Then just to shut Ali G up, I guess I will race him
#12
Originally Posted by KlokDeezal
Well my final decision after looking at everything I could do is to basically order a new wheel. It should be here in about 1 wk. Then just to shut Ali G up, I guess I will race him
you did order the wheels from Hasbro right?
#15
Registered User
Thread Starter
iTrader: (1)
Join Date: Apr 2005
Location: In a Big Azz House!!!
Posts: 1,572
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by clokwork
it does suck that the shipping and handling cost more than the wheel hahahaha