Stillen vs Grounding Gear grounding kit?
#20
Premier Member
iTrader: (17)
To any of you guys who are lining up to pay $90 or more for these "grounding kits" based on their talk of their "quality", I have a business proposition. I will produce one for anyone who wants one of higher quality for a cheaper price. I'll use 4 GA wire instead of 8. I'll let you choose the color of your wires. It'll do the exact same thing as any vendors out there except I'll charge a lot less than $100.
I've done this a number of times. Everything Kyle said is correct. It's not hard and it shouldn't cost so much, but considering how many of you seem eager to pay up, I can see how they charge as much as they do. Almost anyone can do this in less then an hour. If you'd like one PM me.
I've done this a number of times. Everything Kyle said is correct. It's not hard and it shouldn't cost so much, but considering how many of you seem eager to pay up, I can see how they charge as much as they do. Almost anyone can do this in less then an hour. If you'd like one PM me.
#21
Registered User
iTrader: (3)
You really are willing to get the material, measure everything out to proper lengths, and lable wires, crimp everything with high grade connectors, get the bolts you need and hardware, different color wires, plus write up good instructions and provide shipping for a lot less $$$???? Doesn't seem worth it to me.
#22
Nissan/Infiniti corporate authorizes the warranty coverage not the dealership. A dealer rep. on a power trip can think he has some say but at the end of they day they aren't the ones flipping the bill. Besides, if anything happens to your car because of the exhaust I would be absolutely amazed and the dealership would need to prove that the exhaust caused the damage/failure to void the warranty.
#24
Premier Member
iTrader: (17)
I had an SES after HFC's and cat-back were installed. It was showing the AF ratio sensor in the manifold was reading funny. They tried to blame the cat-back and said it voided the warranty. After installing Stillen headers, everything is fine the SES just gave me an excuse to go with the full exhaust anyway so you, stillen, should be happy great products BTW!
#25
Lexus Defector
iTrader: (60)
You really are willing to get the material, measure everything out to proper lengths, and lable wires, crimp everything with high grade connectors, get the bolts you need and hardware, different color wires, plus write up good instructions and provide shipping for a lot less $$$???? Doesn't seem worth it to me.
#26
Premier Member
iTrader: (17)
If I get enough interest to make buying the materials cost effective, I'll do it. It wouldn't be worthwhile to make only one or two because I wouldn't be able to buy the materials in bulk. So far there has been interest by 3 members. If at least 6 people want them, I'll do it. PM me if you have interest.
#28
I had an SES after HFC's and cat-back were installed. It was showing the AF ratio sensor in the manifold was reading funny. They tried to blame the cat-back and said it voided the warranty. After installing Stillen headers, everything is fine the SES just gave me an excuse to go with the full exhaust anyway so you, stillen, should be happy great products BTW!
On a side note. Great choice on the headers! and thanks for the compliments!
Thread
Thread Starter
Forum
Replies
Last Post
redlinernyc
Engine, Drivetrain & Forced-Induction
10
02-29-2016 11:06 PM
gammamotors
Engine, Drivetrain & Forced-Induction
44
12-31-2015 12:48 AM
inspector94
Engine, Drivetrain & Forced-Induction
8
09-08-2015 12:57 PM