Kingston Kustoms - Essence Inspired Bumper and Diffuser.
11-26-2011, 07:19 PM
#1
Kingston Kustoms - Essence Inspired Bumper and Diffuser.
Hey Everyone,
So its been a long time running but I am officially producing and shipping out the Essence inspired Bumper and Diffuser as you may have seen in the threads https://www.myg37.com/forums/body-in...bored-lol.html
and https://www.myg37.com/forums/body-in...r-the-g37.html
For those wanting a quick summary… I do not do this for a living nor do I want to. My life is way too busy to make a ton of designs for all kinds of cars and bikes so I am keeping it limited and to only customizing a few vehicles I find potential in and would drive/own. When I first saw the Infiniti G37 I loved it but I really wanted to modify it. I found many of the aftermarket designs….well….were kind of missing something and were limited in comparison to what the G37 was originally based on….The Essence. So one day while bored at home in my garage, I started to create these to suit my taste for the car. I put pics up on MyG37 from design stage to completion and had a lot of comments and requests to start reproducing. So after some thought and persuasion from family, friends and many of you, I am now as Kingston Kustoms. This is something I did for fun but thanks to you, I now have the opportunity to share a few of my designs.
Here’s a quick break down of the parts:
Bumper: Inspired from the Infiniti Concept car The Essence. It is a direct bolt on and only requires the removal of the Styrofoam bumper in order to fit. It uses the same brackets/hardware to ensure a tight fit. It does sit much lower then a standard bumper as my car is only lowered 1.2” in the front and 0.8” in the rear but has a moderate aggressive stance. For those who have to have front licence plate, you may have to modify your plate in order to not scrap it while going up or down steep driveways/roads. Check with your local state/province law before modifying your plate. The bumper is $400 CDN without any mesh or emblem. Shipping Ranges from $185-200 CDN to the USA
Mesh: I have chosen again that along the lines of what the concept car uses: An aluminum ¼” flat expanded mesh. This is an additional $40 CDN
MT Fugi Emblem: An LED backlit illuminated copy as well from the Essence. This emblem can attach to your day time running lights/parking lights to give a very distinctive look to the car at night. $120 CDN
Diffuser: Following the idea of having a closed of rear section of the exhaust like the essence, I borrowed some design from Lamborghini and created this lightweight diffuser. This Diffuser is to be used with the sport rear bumper mud flaps for best fit and comes with stainless steel mesh. The space between the mesh and diffuser is for stock size pipes but with adjustments to the mesh it can easily accommodate 4 3/4'” tips. Diffuser $300 CDN Shipping is around $85 CDN to the USA
Please email for shipping quotes or for more info at Kingstonkustoms@hotmail.com .
So its been a long time running but I am officially producing and shipping out the Essence inspired Bumper and Diffuser as you may have seen in the threads https://www.myg37.com/forums/body-in...bored-lol.html
and https://www.myg37.com/forums/body-in...r-the-g37.html
For those wanting a quick summary… I do not do this for a living nor do I want to. My life is way too busy to make a ton of designs for all kinds of cars and bikes so I am keeping it limited and to only customizing a few vehicles I find potential in and would drive/own. When I first saw the Infiniti G37 I loved it but I really wanted to modify it. I found many of the aftermarket designs….well….were kind of missing something and were limited in comparison to what the G37 was originally based on….The Essence. So one day while bored at home in my garage, I started to create these to suit my taste for the car. I put pics up on MyG37 from design stage to completion and had a lot of comments and requests to start reproducing. So after some thought and persuasion from family, friends and many of you, I am now as Kingston Kustoms. This is something I did for fun but thanks to you, I now have the opportunity to share a few of my designs.
Here’s a quick break down of the parts:
Bumper: Inspired from the Infiniti Concept car The Essence. It is a direct bolt on and only requires the removal of the Styrofoam bumper in order to fit. It uses the same brackets/hardware to ensure a tight fit. It does sit much lower then a standard bumper as my car is only lowered 1.2” in the front and 0.8” in the rear but has a moderate aggressive stance. For those who have to have front licence plate, you may have to modify your plate in order to not scrap it while going up or down steep driveways/roads. Check with your local state/province law before modifying your plate. The bumper is $400 CDN without any mesh or emblem. Shipping Ranges from $185-200 CDN to the USA
Mesh: I have chosen again that along the lines of what the concept car uses: An aluminum ¼” flat expanded mesh. This is an additional $40 CDN
MT Fugi Emblem: An LED backlit illuminated copy as well from the Essence. This emblem can attach to your day time running lights/parking lights to give a very distinctive look to the car at night. $120 CDN
Diffuser: Following the idea of having a closed of rear section of the exhaust like the essence, I borrowed some design from Lamborghini and created this lightweight diffuser. This Diffuser is to be used with the sport rear bumper mud flaps for best fit and comes with stainless steel mesh. The space between the mesh and diffuser is for stock size pipes but with adjustments to the mesh it can easily accommodate 4 3/4'” tips. Diffuser $300 CDN Shipping is around $85 CDN to the USA
Please email for shipping quotes or for more info at Kingstonkustoms@hotmail.com .
Last edited by Kingston Kustoms; 02-16-2012 at 04:54 AM.
11-27-2011, 01:08 PM
#5
Awesome, what kind of bike is that?
Trending Topics
11-28-2011, 12:18 PM
#10
Registered User
looks like it would fit
I have a 2007 G35 sedan, it looks like your fascia would fit it if I swapped out the headlights with the 2010-up headlights... what do you think. I love the design!! I'm not exactly keen on the rear diffuser, but it does look ok, just not as uniform as the front in terms of overall design. So anyway, let me know if you think it would fit. Thanks for putting the work into this too, I know what it takes....
11-29-2011, 06:49 AM
#12
It won't fit but my buddy has a sedan and asked if I could look into it. Maybe next year!
I have a 2007 G35 sedan, it looks like your fascia would fit it if I swapped out the headlights with the 2010-up headlights... what do you think. I love the design!! I'm not exactly keen on the rear diffuser, but it does look ok, just not as uniform as the front in terms of overall design. So anyway, let me know if you think it would fit. Thanks for putting the work into this too, I know what it takes....
11-29-2011, 10:25 AM
#14
Registered Member
