CF mirror cover by Limited Edition
#19
Former Sponsor
Thread Starter
iTrader: (4)
Join Date: Nov 2009
Posts: 360
Likes: 0
Received 0 Likes
on
0 Posts
They are mirror caps that go over the OEM mirror cover. We played around with the idea of doing replacements at first but abandoned it because:
1. higher cost
2. the piece must include all the clips like on the OEM cover
The thickness is about 1mm. We thought about making it thicker but it'd take away from the flexibility, which is what gives you a little bit of free play when mounting. The thin piece also sits more flush.
I was very happy with the fitment, I'd say it's 99.9% since I don't believe in 100% fitment. The contours are matched very well and with the flexibility, they fit like a glove.
1. higher cost
2. the piece must include all the clips like on the OEM cover
The thickness is about 1mm. We thought about making it thicker but it'd take away from the flexibility, which is what gives you a little bit of free play when mounting. The thin piece also sits more flush.
I was very happy with the fitment, I'd say it's 99.9% since I don't believe in 100% fitment. The contours are matched very well and with the flexibility, they fit like a glove.
Last edited by Danny@Limited Edition; 11-30-2009 at 04:51 PM.
#21
Registered User
iTrader: (5)
They are mirror caps that go over the OEM mirror cover. We played around with the idea of doing replacements at first but abandoned it because:
1. higher cost
2. the piece must include all the clips like on the OEM cover
The thickness is about 2mm. We thought about making it thicker but it'd take away from the flexibility, which is what gives you a little bit of free play when mounting. The thin piece also sits more flush.
I was very happy with the fitment, I'd say it's 99.9% since I don't believe in 100% fitment. The contours are matched very well and with the flexibility, they fit like a glove.
1. higher cost
2. the piece must include all the clips like on the OEM cover
The thickness is about 2mm. We thought about making it thicker but it'd take away from the flexibility, which is what gives you a little bit of free play when mounting. The thin piece also sits more flush.
I was very happy with the fitment, I'd say it's 99.9% since I don't believe in 100% fitment. The contours are matched very well and with the flexibility, they fit like a glove.
You have PM
#24
Former Sponsor
Thread Starter
iTrader: (4)
Join Date: Nov 2009
Posts: 360
Likes: 0
Received 0 Likes
on
0 Posts
Yup, it's surprisingly easy, takes about 2 seconds for each side to come out. But to make replacements, 1. it has to fit 99.9% around the edges, 2. it has to include ALL oem clips to so the replacement can clip onto the mirror, all clips but also be close to 100% fitment. We thought that would've made production a little more difficult and would also drive up the cost. After all, our goal is to make this available for as many people we can, not to label it as a high-end big dollar item.
Your car is going to look insane with the motor-lux trunk!
Production covers will be mounted with 3M tape.