Special Status elite dry carbon engine cover special for the month of april
04-03-2009, 06:47 AM
#1
Status elite dry carbon engine cover special for the month of april
Just for the month of April, Status Elite has authorized us to sell the dry carbon engine cover for our G37.
$419 shipped, after april, i will be adjusting the price on our website to $489
Every carbon fiber product we produce is “Dry Carbon.” We utilize the highest quality materials and manufacturing process available in the industry. Our manufacturing process is similar to those of aerospace, aviation, military, motorsports, and Formula 1.
Every composite part starts with the mold and is the most expensive part of producing a product. A quality mold reflects high quality part. At Status Elite we hand craft our molds with high grade epoxy and carbon fiber.
“Dry Carbon” the name has nothing to do with the look and finish of the piece, but it has everything to do with how it’s made. “Dry Carbon” (aka Pre-Preg) is Carbon Fiber pre-impregnated with frozen resin. We utilize a special type of high grade epoxy in our pre-impregnated fibers so that the resin can provide continuous service about 350 degrees. Once vacuumed pressure and heat is induced the resin flows evenly providing the same consistency for every piece.
At Status Elite we vacuum bag and AUTOCLAVE every part we produce. The advantage of autoclaving is the constant high pressure and high temp cure which enables the part to achieve high durability and strength. Under applied pressure the “Dry Carbon” (aka Pre-Preg) is able to fuse tightly together. Applied pressure allows excess resin to be removed, which translates to light weight.
for those of us that had a slight problem with the GT SPEC STRUT BAR, here is you best solution. Since the SE engine cover is slightly smaller in height, you can now adjust your strut bar to the lowest possible point and will not have any rubbing or scratch issues on your bar with this engine cover
If any questions, please feel free to contact us
Thanks
Lou
www.amplifiedmotorsport.com
AIM: AMPDMOTORSPORT
323 8810882
$419 shipped, after april, i will be adjusting the price on our website to $489
Every carbon fiber product we produce is “Dry Carbon.” We utilize the highest quality materials and manufacturing process available in the industry. Our manufacturing process is similar to those of aerospace, aviation, military, motorsports, and Formula 1.
Every composite part starts with the mold and is the most expensive part of producing a product. A quality mold reflects high quality part. At Status Elite we hand craft our molds with high grade epoxy and carbon fiber.
“Dry Carbon” the name has nothing to do with the look and finish of the piece, but it has everything to do with how it’s made. “Dry Carbon” (aka Pre-Preg) is Carbon Fiber pre-impregnated with frozen resin. We utilize a special type of high grade epoxy in our pre-impregnated fibers so that the resin can provide continuous service about 350 degrees. Once vacuumed pressure and heat is induced the resin flows evenly providing the same consistency for every piece.
At Status Elite we vacuum bag and AUTOCLAVE every part we produce. The advantage of autoclaving is the constant high pressure and high temp cure which enables the part to achieve high durability and strength. Under applied pressure the “Dry Carbon” (aka Pre-Preg) is able to fuse tightly together. Applied pressure allows excess resin to be removed, which translates to light weight.
for those of us that had a slight problem with the GT SPEC STRUT BAR, here is you best solution. Since the SE engine cover is slightly smaller in height, you can now adjust your strut bar to the lowest possible point and will not have any rubbing or scratch issues on your bar with this engine cover
If any questions, please feel free to contact us
Thanks
Lou
www.amplifiedmotorsport.com
AIM: AMPDMOTORSPORT
323 8810882
04-24-2009, 10:56 PM
#13
Registered User
