Special STATUS ELITE DRY CARBON PARTS now available from AMPLIFIED MOTORSPORT
03-03-2009, 09:12 AM
#16
Haha, it's nearly impossible to remove. Dental floss wont work either. These labels are super high quality. They are designed to withstand ALL weather conditions. But its OK. If you think you are SOL, you are really not. You just need to be VERY VERY careful and patient.
USE A SIMILAR TOOL FOR THIS INSTRUCTION TO APPLY. REMOVING THE STATUS ELITE LABEL IS AT YOUR OWN DISCRETION. WE ARE NOT RESPONSIBLE FOR ANY DAMAGES!
BY REMOVING THIS LABEL YOU WILL LOSE 5 WHP
Step 1:
Use the tip of the tool and pry upwards on an edge of the label.
Step 2:
Use your thumb to pull upwards on an edge of the label after you have pryed an edge.
Kevin
USE A SIMILAR TOOL FOR THIS INSTRUCTION TO APPLY. REMOVING THE STATUS ELITE LABEL IS AT YOUR OWN DISCRETION. WE ARE NOT RESPONSIBLE FOR ANY DAMAGES!
BY REMOVING THIS LABEL YOU WILL LOSE 5 WHPStep 1:
Use the tip of the tool and pry upwards on an edge of the label.
Step 2:
Use your thumb to pull upwards on an edge of the label after you have pryed an edge.
Kevin
03-04-2009, 07:33 PM
#17
Former Sponsor
iTrader: (1)
Join Date: Dec 2008
Location: Danville, CA
Posts: 267
Likes: 0
Received 0 Likes
on
0 Posts
Status Elite Dry Carbon Fiber Products
Hi G37 Members,
I am Robert from Status Elite. I will be handling all the technical questions about our Dry Carbon Products. If you have any questions regarding our dry carbon process or technology , please pm me and put attn: Robert and i will get back to you asap.
Many members showed up at the BBQ and i was able to explain it in person and show members the difference between a wet laid product and dry carbon product.
Our product should have no fitment issues, as we are able to achieve an OEM fit through the use of our technology and process of manufacturing.
Robert @ Status Elite.
Thank you
I am Robert from Status Elite. I will be handling all the technical questions about our Dry Carbon Products. If you have any questions regarding our dry carbon process or technology , please pm me and put attn: Robert and i will get back to you asap.
Many members showed up at the BBQ and i was able to explain it in person and show members the difference between a wet laid product and dry carbon product.
Our product should have no fitment issues, as we are able to achieve an OEM fit through the use of our technology and process of manufacturing.
Robert @ Status Elite.
Thank you
03-17-2009, 01:43 AM
#23
Registered User
Join Date: Mar 2009
Location: Santa Monica, CA
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
The Dry Carbon Fiber is amazing! Most people think "Dry" Carbon is indicated by its appearance and finish, but it's actually determined by the process on how it's made! I'm a fan of Status Elite's dry carbon.
03-22-2009, 02:52 AM
#25
good new guys. A few engine cover is now ready for shipping as per status elite
Let me know who wants in. The clearance for the GT-SPEC STRUT BAR is now bigger so you can lower the strut brace at lowest point of adjustment with plenty of clearance from the hood and the status elite carbon engine cover
I will be posting pictures by monday
Price for the Engine Cover is $419 plus shipping
thank you
Lou
Let me know who wants in. The clearance for the GT-SPEC STRUT BAR is now bigger so you can lower the strut brace at lowest point of adjustment with plenty of clearance from the hood and the status elite carbon engine cover
I will be posting pictures by monday
Price for the Engine Cover is $419 plus shipping
thank you
Lou
