Help Motordyne Resonated XYZ Pipe
#1
Registered Member
Thread Starter
Motordyne Resonated XYZ Pipe
Currently I have a top speed muffler delete on my sedan. It may sound stupid, but would adding the resonated y pipe help with drone? I've gotten used to the drone, and there seems to be less now, but at some points it can be annoying. Obviously the easy answers are; put the stock mufflers back on, or buy a full catback. I'd like to utilize what I have now, and I cannot afford, nor want to spend 1500-2000 on an exhaust. I can get the motordyne y pipe for in the high $300 range.
#2
Registered Member
iTrader: (5)
Currently I have a top speed muffler delete on my sedan. It may sound stupid, but would adding the resonated y pipe help with drone? I've gotten used to the drone, and there seems to be less now, but at some points it can be annoying. Obviously the easy answers are; put the stock mufflers back on, or buy a full catback. I'd like to utilize what I have now, and I cannot afford, nor want to spend 1500-2000 on an exhaust. I can get the motordyne y pipe for in the high $300 range.
I have a feeling if you are buying new, the motordyne is closer to 500 with the resonator module.
Check out circuit werks resonated Y pipe on ebay. About 260 on ebay. says for 350z but Y pipes are interchangeable.
so long as RWD.
I've used it in the past with good results on drone/ high pitch noise cancellations.
#3
Registered Member
Thread Starter
I should mention I am AWD. I called motordyne, and the AWD XYZ pipe is $414. That is before 10% off for black friday. I will reach out to circuit werks and see if they have anything for AWD
#5
Registered Member
Thread Starter
Just double checked. AWD Resonated XYZ Pipe for $373 after discounts, with no lead time. They figure $60-$70 shipped. So call it $450 out the door.
I looked at the circuit werks y pipe, and the listing for the G35 says it will fit all models. Would it fit AWD since it's more of a U shape and not a V shape, to clear the transfer case?
I looked at the circuit werks y pipe, and the listing for the G35 says it will fit all models. Would it fit AWD since it's more of a U shape and not a V shape, to clear the transfer case?
#6
Yes it will help.
I have a feeling if you are buying new, the motordyne is closer to 500 with the resonator module.
Check out circuit werks resonated Y pipe on ebay. About 260 on ebay. says for 350z but Y pipes are interchangeable.
so long as RWD.
I've used it in the past with good results on drone/ high pitch noise cancellations.
I have a feeling if you are buying new, the motordyne is closer to 500 with the resonator module.
Check out circuit werks resonated Y pipe on ebay. About 260 on ebay. says for 350z but Y pipes are interchangeable.
so long as RWD.
I've used it in the past with good results on drone/ high pitch noise cancellations.
Thread
Thread Starter
Forum
Replies
Last Post