Port and polish TB's, manifold and lower manifold from IPS Motorsports!
#48
Registered User
Thread Starter
No yesterday was not the last one. Read the post right above that one. The one you're talking about is the tuners dyno.
#49
Registered User
Thread Starter
370z 50-100mph tread. Everyone post. - Nissan 370Z Forum
So my dyno and 1/4 mile all suck but at least I have some power to prove from all this!! This tells me my dyno reads low and my tires suck for the strip. I'm getting 6.5 seconds on the vid and that's with my tires chirping in 2nd. I figure that's a good tenth or two right there if i can get them hotter. This is ZL1 and C63 AMG territory so woohoo for only 302rwhp.
synolimit, 2013, Nissan, 370z, 3200*, 3.7, 6 Cyl, All Motor, NA, 93, 302, 244, 14.0, 105.5, 6.5
So my dyno and 1/4 mile all suck but at least I have some power to prove from all this!! This tells me my dyno reads low and my tires suck for the strip. I'm getting 6.5 seconds on the vid and that's with my tires chirping in 2nd. I figure that's a good tenth or two right there if i can get them hotter. This is ZL1 and C63 AMG territory so woohoo for only 302rwhp.
synolimit, 2013, Nissan, 370z, 3200*, 3.7, 6 Cyl, All Motor, NA, 93, 302, 244, 14.0, 105.5, 6.5
#51
Registered User
Thread Starter
Currently I have 2 sets of TB's and 1 lower mani. They are ready to be sent for porting at anytime someone buys. Currently one member here is looking.
#52
Registered User
Thread Starter
#53
Registered User
Thread Starter
added the upper intake manifold back into the FS thread!!
soon to have bench flow testing done!
https://www.myg37.com/forums/private...le-bodies.html
soon to have bench flow testing done!
https://www.myg37.com/forums/private...le-bodies.html
#55
Registered User
Thread Starter
#56
Registered User
Throttle Body Results
RESULTS! I will recommend these!
Dyno: Dynojet
Dyno video:
Dyno graph: AT BOTTOM
Car: 08' G37s 6MT
The Throttle Bodies were the last mod that I have done. Prior to the new throttle bodies my numbers:
304.87 HP
256.86 TQ
STD
Mods: Motordyne Art Pipes, Motordyne E370 Shockwave Cat-Back Exhaust, Motordyne Intake Manifold, Stillen Gen3 Intakes, Uprev Tune.
Numbers after the new TB's and retune:
317.92 HP
269.98 TQ
SAE
Mods: Motordyne Art Pipes, Motordyne E370 Shockwave Cat-Back Exhaust, Motordyne Intake Manifold, Stillen Gen3 Intakes, Uprev Tune, 63mm ported TB's.
Dyno: Dynojet
Dyno video:
Dyno graph: AT BOTTOM
Car: 08' G37s 6MT
The Throttle Bodies were the last mod that I have done. Prior to the new throttle bodies my numbers:
304.87 HP
256.86 TQ
STD
Mods: Motordyne Art Pipes, Motordyne E370 Shockwave Cat-Back Exhaust, Motordyne Intake Manifold, Stillen Gen3 Intakes, Uprev Tune.
Numbers after the new TB's and retune:
317.92 HP
269.98 TQ
SAE
Mods: Motordyne Art Pipes, Motordyne E370 Shockwave Cat-Back Exhaust, Motordyne Intake Manifold, Stillen Gen3 Intakes, Uprev Tune, 63mm ported TB's.
The following 3 users liked this post by OneSickBlackG:
The following users liked this post:
Synolimit (11-03-2014)