When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Btw i noticed today when I pulled MAF sensors out the stock air boxes they need to be flipped around to fit into the R2C pipes! Is this normal? I tried to put I'm exactly how they sit in stock intakes but the holes don't line up unless sensors are flipped.
man u serious?? WTH, Sound like the MAF's are not reading at all? There nothing in the pipes pluging anything, No popcorn and anything is there, As dumb as it sounds but I'm out of thoughts also?
Pipes are clean of anything that may b in the way. Still nothing just dies after install. Everything in and secure . I will try again tomorrow I gotta go to Work . maybe these pipes are just a bad batch. Dunno
you cant flip the MAF sensor around it wont read right they are only suppose to go in one way..thats problem the problem right there..swap the tubes so the face the right way if you can or does it not line up??
Last edited by chuckie311; 04-05-2011 at 02:59 PM.
.....? If the sensors have to be reversed then the issue is with the position in which they drilled the holes (used for screwing in the sensor). Its an R2C issue, get new pipes. Use my thread to compare screw hole orientation... https://www.myg37.com/forums/picture...ut-to-r2c.html
Btw i noticed today when I pulled MAF sensors out the stock air boxes they need to be flipped around to fit into the R2C pipes! Is this normal? I tried to put I'm exactly how they sit in stock intakes but the holes don't line up unless sensors are flipped.
No they should not have to be flipped around that maybe he issue right there, If I remember there is a FLOW arrow on the stock intake pipe no?
Well at least we all figured the issue out with him.
Or so we hope! Hopefully Kyle or R2C take care of him.
I'm glad he got a lot of responses pretty fast, he helped me out when I was looking to get my Vossens.
Thanks everyone I'm gonna contact Kyle and see if I can get new tubes! I really appreciate the help really. Has been a headache but hopefully I can get these replaced cause this is no fun.
Awesome thanks everyone ! I got busy at work but had a voicemail from R2C it seems there customer service is great! Just kinda upset at time waisted. This should not happen when u drop $400 on intakes. But I'm sure it's gonna be resolved . Thanks again for the help.
Last edited by VossenG37S; 04-06-2011 at 01:13 AM.
04-05-2011, 01:57 PM
