When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
So I received my ark exhaust and was wondering if there is a way I can polish off the blue coating that is on the tips. Can I do this myself and how ??? Thanx
There's a few posts somewhere on the forum by those who have done it. I believe that you should use the metal polish of your choice and apply it using done elbow grease.
I used a combination of products I already had - rubbing compund, Mothers aluminum wheel polish and Flitz. Used a wool buffing pad on an electric drill and an angle grinder with a buffing pad. With repeated applications of each, it comes off. I did gouge the underside of one of the Megan tips slightly when I did when I didn't watch the nut on grinder close enough but it workded.
10-27-2010, 02:52 PM
