first mxp installed!!!
#137
Former Sponsor
Join Date: Aug 2008
Location: Marietta, GA
Posts: 1,636
Likes: 0
Received 0 Likes
on
0 Posts
You have to realize that most companies usually use 1 car for test fitting all their parts on. The test car happened to be a MT, not an AT. They were made to properly clearance everything on the MT underbody, not an AT. This does not mean they have no intentions of catering to the AT guys or else they would be doing nothing to remedy the problem.
I understand that a good bit of this information is confusing. However I would request that everyone try to understand the situation and not jump to conclusions.
#138
Registered User
iTrader: (2)
Thanks for the clear information Ryan. Looks like AT guys are just fine - just need a tad bit more patience for the updated midpipe replacement or whatever. With how long we've waited on this system - what's a tad more wait right? Maybe it will be ready right alongside the next shipment!
#139
Registered User
iTrader: (6)
Join Date: Sep 2003
Location: West Bloomfield, Michigan
Posts: 1,000
Likes: 0
Received 0 Likes
on
0 Posts
Mine was installed last week on my '09 7AT. I believe I was the 2nd to get the MXP and have it installed. The shop said there wer no issues but after driving it the mufflers is off a bit as well as the passenger side tip. And, there is occasional knocking from the H-Pipe and Trans. I still love it and am glad MXP & Mackin are trying to resolve this for us. Don't worry if you have a 6MT. If you have a 5/7AT buy the time the other orders are filled I'm sure this issue will be resolved. I do love this exhaust FYI.
Last edited by JKashat; 07-21-2009 at 02:48 PM.
#141
Registered User
Thread Starter
iTrader: (4)
Join Date: Nov 2008
Location: SoCal
Posts: 321
Likes: 0
Received 0 Likes
on
0 Posts
UPDATE:
I just got the new mid pipe installed. FIT like a charm. By changing the mid pipe also corrected the right tip problem.
THANKS to Mackin for resolving the problem quickly. I believe the next batch will be the fixed version. Dont trip its all goooood now. Ang thanks for the little teaserrr... ill be hitting up Lou/Paul very very soooooon.
Im sure Brian or someone will post pix of the fitted mid pipe on my car.
thanks again guys.
I just got the new mid pipe installed. FIT like a charm. By changing the mid pipe also corrected the right tip problem.
THANKS to Mackin for resolving the problem quickly. I believe the next batch will be the fixed version. Dont trip its all goooood now. Ang thanks for the little teaserrr... ill be hitting up Lou/Paul very very soooooon.
Im sure Brian or someone will post pix of the fitted mid pipe on my car.
thanks again guys.
#144
Former Sponsor
Join Date: Aug 2008
Location: Marietta, GA
Posts: 1,636
Likes: 0
Received 0 Likes
on
0 Posts
Thread
Thread Starter
Forum
Replies
Last Post