Help stillen gen 3 issue
#1
Registered User
Thread Starter
Join Date: Dec 2008
Location: Brooklyn, NY
Posts: 31
Likes: 0
Received 0 Likes
on
0 Posts
stillen gen 3 issue
hey guys i wanna start off by saying im a newbie but ive been looking on this forum alot for help and what not but my issue is that i installed my stillen gen 3 intake in today and i have a check engine light on and my car boggs down and has a rough idle, i checked the code and its a mass air flow code. has this happen to anybody else and how do i get rid out thisa problem or is it just better to go back to the stock air box. please really need help guys. thanks ohh yea and my check engine light flashes .
#3
Registered User
iTrader: (2)
I did the same thing when i got my intakes....i was so anxious to get the car started with the intakes on, i forgot to plug in one of my MAF sensors. Threw a code, my friend cleared it and it was fine. Sooo, with the being said, check to make sure both your maf sensors are properly plugged in.The code can be cleared at any autozone.
#4
Registered User
Thread Starter
Join Date: Dec 2008
Location: Brooklyn, NY
Posts: 31
Likes: 0
Received 0 Likes
on
0 Posts
i checked to make sure everythign was tight but i didnt reset the ecu. how do i do that? and its deffenitly not all rigged up i didnt it at my friends shop (its nice to have all the tools lol)
#6
Registered User
Join Date: Nov 2008
Location: Qurtoba, Kuwait
Posts: 33
Likes: 0
Received 0 Likes
on
0 Posts
#7
Registered User
iTrader: (2)
Also, the car bogging down sounds more like a vacuum issue to me. The car will run with an MAF code, it just wont run normal during regular driving. Being that we have two maf sensors the car can run with one maf reading, it just wont run under load. My car ran fine with the MAF unplugged. I wouldnt have known if it wasnt for the code. Rough idle and bogging sounds like a vacuum leak somewhere. Ide double check all hoses in the area.
Trending Topics
#11
Registered User
iTrader: (1)
Join Date: Apr 2006
Location: jacksonville, fl
Posts: 4,563
Likes: 0
Received 0 Likes
on
0 Posts
maf sensors - unplug em and reconnect carefully. make sure you didnt let any dirt or crap get in them. as far the battery reset, the g35 had to be left disconnect overnight, not 15 mins...