Fast Intentions Sound Clips
#48
Registered User
iTrader: (3)
the pupose of the blue is just for a look. When you super heat Ti it changes all different colors depending on the temp you heat the metal too. It serves no performance purposes but in my opinion it looks bad ***. Lower end exhaust that are not full Ti but have riveted Ti tips are always going to be blue. the only reason for riviting on Ti tips is again for the looks. Many of the top model full Ti exhaust come with the option of getting burnt Ti or not. For instance Amuse can be had with no burnt look just pure Ti, burnt tip's, full burnt tips, full burnt can, or full burnt exhaust. hope this helps
#51
Registered User
iTrader: (3)
I wouldnt recommend doing this. The gold color your talking about is the metal oxidizing. Its not going to stay a nice pretty gold. Its going to start to look like its a burnt nasty gold. thats why you dont see SS systems with burnt tips. In order to get that nice gold burnt look on the tips they rivit Ti tips on. Ti can be burnt blue, purple, gold depending on the amount of heat applied to the ti. perfect example is the gold on my ARC Ti ****. It will always be that nice gold on the lower portion because I cant get the **** that hot without using a torch. SS will change over time. So while you may be happy with the results you acheived at first by heating your ss tips with time its going to change and not look nice.
#52
MYG37.COM Sponsor
iTrader: (6)
Tony
#53
Registered User
First, the components (mufflers and tips) are the same with all three choices, so the difference is in the tubing used.
I don't think aluminized is necessarily "bad". Keep in mind almost all production exhausts (like the stock one) are steel and do not use any coating. Aluminized steel is still steel with a coating. I guess if you manage to remove the coating, the steel substrate is exposed and can possibly oxidize. But if you manage to do that much damage to the bottom of the car, you have other things to worry about because most of the exaust is really tucked up tight under the car. You can see pictures of their exhaust using aluminized tubing on here:
http://g35driver.com/forums/showthread.php?t=195719
Stainless steel has the advantage of little or no chance of oxidation, of course depending on the alloy used. Stainless steel alloys with lower iron content will oxidize less. Even if you damage the tubing, there is less change of rust. Personally, I would go this route if you plan to keep the car for a long time and/or you live in snow country.
Finally, the polished SS is obviously SS, but with a polished finish for aesthetics (if you wanna show off the bottom of your car?).
One detail that I would ask is what is the thickness of aluminized steel tubing vs. the SS tubing used. IIRC, the aluminized tubing is slightly thicker (FI will have to verify this). The thicker tubing will provide for a quieter exhaust. IMO, I would neglect the minor weight difference unless every pound counts, but remember this is a street car.
I don't think aluminized is necessarily "bad". Keep in mind almost all production exhausts (like the stock one) are steel and do not use any coating. Aluminized steel is still steel with a coating. I guess if you manage to remove the coating, the steel substrate is exposed and can possibly oxidize. But if you manage to do that much damage to the bottom of the car, you have other things to worry about because most of the exaust is really tucked up tight under the car. You can see pictures of their exhaust using aluminized tubing on here:
http://g35driver.com/forums/showthread.php?t=195719
Stainless steel has the advantage of little or no chance of oxidation, of course depending on the alloy used. Stainless steel alloys with lower iron content will oxidize less. Even if you damage the tubing, there is less change of rust. Personally, I would go this route if you plan to keep the car for a long time and/or you live in snow country.
Finally, the polished SS is obviously SS, but with a polished finish for aesthetics (if you wanna show off the bottom of your car?).
One detail that I would ask is what is the thickness of aluminized steel tubing vs. the SS tubing used. IIRC, the aluminized tubing is slightly thicker (FI will have to verify this). The thicker tubing will provide for a quieter exhaust. IMO, I would neglect the minor weight difference unless every pound counts, but remember this is a street car.
Last edited by GiGGaplease; 01-22-2008 at 09:32 PM.
#55
Premier Member
Join Date: Jul 2007
Location: Colorado Springs, CO
Posts: 3,346
Likes: 0
Received 3 Likes
on
3 Posts
Sorry for the ignorance but what is the difference between the three options? Is there a weight difference? Does the top end system have less weight? I know a lot of people get titanium exhaust because they weight less therefore helps to increase the performance of the car. I wouldn't imagine there being a HP/TQ difference between the exhaust so just want to know why someone would get the top end system over the mid or lower end one.
#56
Premier Member
Thread Starter
I think its mainly for looks? the stainless steel although may weigh a hair less. I ll let FI answer this one though. you can always call them and ask to,
www.fastintentions.com or www.thmmotorsports.com tony or eddie can break it down to u.
www.fastintentions.com or www.thmmotorsports.com tony or eddie can break it down to u.
#58
Registered User
iTrader: (1)
Join Date: Dec 2007
Location: The Motherland, Russia
Posts: 214
Likes: 0
Received 0 Likes
on
0 Posts
Sorry for the ignorance but what is the difference between the three options? Is there a weight difference? Does the top end system have less weight? I know a lot of people get titanium exhaust because they weight less therefore helps to increase the performance of the car. I wouldn't imagine there being a HP/TQ difference between the exhaust so just want to know why someone would get the top end system over the mid or lower end one.
Soooooooo, what's the difference in weight for the FI cat back exhaust system and the stock cat back exhaust system?
#60
Registered Member
iTrader: (37)
On our street cars, the weight variation between stock, aluminized and stainless steel is insignificant. You get more weight swings between a full tank of gas and an empty tank!
Also just confirmed today, the aluminized steel tubing they use is 14 ga and the SS tubing they use is 16 ga. That means the alunminized tubing is a little thicker so it should theoretically be a little quieter.
Also just confirmed today, the aluminized steel tubing they use is 14 ga and the SS tubing they use is 16 ga. That means the alunminized tubing is a little thicker so it should theoretically be a little quieter.