G37 Sedan

Windshield wiper replacements: 2020 edition

Thread Tools
 
Search this Thread
 
Old 11-02-2020, 11:22 AM
  #1  
STownSaint
Registered Member
Thread Starter
 
STownSaint's Avatar
 
Join Date: Apr 2011
Location: US
Posts: 1,698
Received 331 Likes on 253 Posts
Windshield wiper replacements: 2020 edition

Figured no harm in having one of these threads every few years (last one looks like it’s from 2017).

Was still on my original set of wipers, rubber blades were peeling and the arms were getting faded.

At first, tried to get some OEM refills (to replace just the rubber part), but since the dealership can’t get them and I’ve had two orders for them cancelled, apparently they’re discontinued. Another member on the forum found the generic “mitsuba” part number for the refills, but the actual shape of the refill changes year to year for our cars, and didn’t feel like experimenting.

So went the aftermarket route. Selection at local auto parts stores was Ok, but even the expensive ones looked clunky and since they’re visible when driving, that’d bug me.

Finally found a set that looked good online, PIAA Aero Vogue. Feel nice and sturdy, mounted fine, seem to work fine (they come with wipes to coat the windshield, but I already apply rainX every month or so). And they look even better than the OEM arms. Probably on the pricey side at $50 shipped for the pair, but they should last me a while.

Anyone else have recommendations for the G community?




Old 11-02-2020, 12:38 PM
  #2  
JSolo
Just say no!!!!!
iTrader: (14)
 
JSolo's Avatar
 
Join Date: Oct 2011
Location: People's Republic of IL
Posts: 6,103
Received 590 Likes on 494 Posts
If you review the older threads, there's part numbers (and link?) to some honda inserts that fit the OE arms. That's what I did last time. Worked out well.
Old 11-02-2020, 09:12 PM
  #3  
dkmura
Registered Member
 
dkmura's Avatar
 
Join Date: Jan 2004
Location: Aurora, CO
Posts: 699
Received 82 Likes on 71 Posts
I use the Michelin Latitude wiper blades at Costco. At about $8/blade on sale, it's a high quality part at a decent price.
Old 11-03-2020, 10:45 AM
  #4  
Carboy37
Registered Member
 
Carboy37's Avatar
 
Join Date: Nov 2015
Location: Massachusetts, USA
Posts: 126
Received 12 Likes on 8 Posts
In general, I find that the silicone wipers wear slower but most of the performance comes from surface prep.

I like the Piaa Aero Vogues; you can just buy refills for them every few months.

For auto part store options, I like the Trico NeoForm (most OEM looking) and Trico Onyx (Low-profile, beam style). It just feels less waste to change refills than blades.

Old 11-03-2020, 10:32 PM
  #5  
Epiphany
Registered Member
 
Epiphany's Avatar
 
Join Date: May 2015
Location: Alberta
Posts: 1,728
Received 242 Likes on 215 Posts
Originally Posted by dkmura
I use the Michelin Latitude wiper blades at Costco. At about $8/blade on sale, it's a high quality part at a decent price.
That's what I buy too. I go through 2 sets a year usually and don't find more expensive ones last much longer.
Old 02-17-2021, 10:46 PM
  #6  
SavetheManuals
Premier Member

 
SavetheManuals's Avatar
 
Join Date: Feb 2021
Location: Orange County, CA
Posts: 4
Received 6 Likes on 3 Posts
In SoCal, the factory blades last 3 years... the Costco Michelin wiper replacements only last a year or two and don't work as well or look as good (the factory blades are mounted on the side for a low profile).Since Infiniti quit selling the blade refills, I bought the equivalent Honda Blade Refills today from my friendly Orange County Honda Dealer... in stock... no problem. $15 for the pair. Has "Mitsuba" molded into the blade, just like the Infiniti ones.
Here are the P/Ns for the 2013 G37 SEDAN 6MT:

Driver side: HON76622STKA02 RUB, BLADE (650mm)
Pass side: HON76632STKA02 RUB, BLADE (400mm)


I believe the coupe P/Ns will be different, at least on the passenger side. These have the 1cm wide base and fit perfectly in the factory wiper blade frames.
The following 2 users liked this post by SavetheManuals:
Krzysztof47 (01-17-2024), Selym (02-22-2021)
Old 02-18-2021, 08:41 AM
  #7  
BULL
Moderador
 
BULL's Avatar
 
Join Date: Jun 2019
Location: South Florida
Posts: 2,603
Received 736 Likes on 573 Posts
Any pictures will help.
Old 02-19-2021, 02:26 PM
  #8  
KEVON1
Registered Member
 
KEVON1's Avatar
 
Join Date: Oct 2005
Posts: 21
Received 6 Likes on 6 Posts
Bosch Icon 16A (Passenger Side) & Bosch ICON 26A (Drivers Side) .....Have them on every vehicle I own and in my opinion the best Wiper Blade available .





The following users liked this post:
SlimTV (02-20-2021)
Old 02-20-2021, 02:43 PM
  #9  
SlimTV
Registered Member
 
SlimTV's Avatar
 
Join Date: May 2012
Posts: 114
Received 11 Likes on 10 Posts
200% agree with Kevon1. Bosch Icon are the overall best for the money. Those things last more than anything I've tried up to a $50 price point. It's an all rubber all-season blade like oem. It does have a box connector on it, but that's the weather proofed dual lock mechanism. I have zero complaints, and guessing a few years on the same blades with minimal maintenance. From cold salty winters, through the hottest summer days sitting in direct sunlight daily, they have held up better than any other wipers I tried in the same conditions.

On amazon for $40 for the pair shipped. Yes they sell a 26A/16A wiper combo. Says doesn't fit a G sedan, but I have them on now, they DO fit. I personally have always bought them from autozone locally, so I know they are fresher rubber.

The Honda part numbers in the comment a few posts up don't yield many pics using google search. Would've been nice for op to upload a pic of the Honda blades installed on his car. Hopefully they're side mounted. I might try them one day for that price and the oem fit.

Last edited by SlimTV; 02-20-2021 at 02:57 PM.
The following users liked this post:
KEVON1 (02-22-2021)
Old 02-21-2021, 10:17 PM
  #10  
Victory
Registered Member
 
Victory's Avatar
 
Join Date: Apr 2015
Posts: 1,049
Received 153 Likes on 122 Posts
I buy the OEM wiper blade assembly from the dealership. They have a 12mo warranty and reliably fail before a year is up, so it's pretty much free wipers for life if you keep the receipt.

Also, the factory wiper blade uses an offset mount. I find most aftermarket wipers don't and as a result they miss about an inch of the windshield which bothers me
The following users liked this post:
telcoman (02-28-2021)
Old 02-22-2021, 09:42 PM
  #11  
Selym
Registered Member
 
Selym's Avatar
 
Join Date: Nov 2014
Location: Massachusetts, USA
Posts: 648
Received 96 Likes on 80 Posts
Originally Posted by SavetheManuals
Here are the P/Ns for the 2013 G37 SEDAN 6MT:

Driver side: HON76622STKA02 RUB, BLADE (650mm)
Pass side: HON76632STKA02 RUB, BLADE (400mm)
Thanks, man! I just ordered a set from Dealer Sales Solutions on Amazon.
Old 02-28-2021, 12:31 PM
  #12  
Selym
Registered Member
 
Selym's Avatar
 
Join Date: Nov 2014
Location: Massachusetts, USA
Posts: 648
Received 96 Likes on 80 Posts
Originally Posted by SavetheManuals
In SoCal, the factory blades last 3 years... the Costco Michelin wiper replacements only last a year or two and don't work as well or look as good (the factory blades are mounted on the side for a low profile).Since Infiniti quit selling the blade refills, I bought the equivalent Honda Blade Refills today from my friendly Orange County Honda Dealer... in stock... no problem. $15 for the pair. Has "Mitsuba" molded into the blade, just like the Infiniti ones.
Here are the P/Ns for the 2013 G37 SEDAN 6MT:

Driver side: HON76622STKA02 RUB, BLADE (650mm)
Pass side: HON76632STKA02 RUB, BLADE (400mm)


I believe the coupe P/Ns will be different, at least on the passenger side. These have the 1cm wide base and fit perfectly in the factory wiper blade frames.
I just received mine, and I can confirm that the Honda parts are identical to the Nissan OEM.

Driver's side: Mitsuba MOB2-S2-105 (650 mm)
Passenger's side: Mitsuba MOB2-S2-085 (400 mm)

Thanks again for the tip, StM!

Myles
The following users liked this post:
BULL (03-01-2021)
Old 03-01-2021, 03:31 PM
  #13  
Noogie Lamont
Registered Member
 
Noogie Lamont's Avatar
 
Join Date: Dec 2020
Posts: 66
Likes: 0
Received 6 Likes on 5 Posts
The Honda refills fit most 8th gen Honda Civics and as we are seeing G's. However its 50/50 if you got your car used if you have the Refill arms on your G. Mine did not.

However on this discussion. I have found the cheap Michelin Blades pretty good on the G especially for the price. But as far as the best. I like the Bosch Icon which they stopped making but you can find on Ebay etc for around 40 a set. The Bosch's also seem to have lasted through seb zero winter months as well as +100 Degree days without any cracking etc...
Old 03-01-2021, 07:16 PM
  #14  
Selym
Registered Member
 
Selym's Avatar
 
Join Date: Nov 2014
Location: Massachusetts, USA
Posts: 648
Received 96 Likes on 80 Posts
Originally Posted by Noogie Lamont
However its 50/50 if you got your car used if you have the Refill arms on your G. Mine did not.
Yup, there are two different styles of OEM wiper blades: the type that is refillable, and the "Service Advantage" part that is not refillable. I bought my car CPO and it came with the latter. Once they wore out, I bought a set of the refillable type.
Old 03-01-2021, 11:30 PM
  #15  
STownSaint
Registered Member
Thread Starter
 
STownSaint's Avatar
 
Join Date: Apr 2011
Location: US
Posts: 1,698
Received 331 Likes on 253 Posts
Originally Posted by SlimTV

The Honda part numbers in the comment a few posts up don't yield many pics using google search. Would've been nice for op to upload a pic of the Honda blades installed on his car. Hopefully they're side mounted. I might try them one day for that price and the oem fit.
Think the Honda blades are just refills (which just replace the rubber portion of the OEM wiper), so they probably don’t look any different from the OEM ones installed.


Quick Reply: Windshield wiper replacements: 2020 edition



All times are GMT -4. The time now is 02:49 AM.