JuicyVQ

So I was wondering if I could run 19x9.5 fronts and 19x10.5 for the rears for my wheels. I saw on fitment industries a coupe have the same specs but was running the same tire all around which was 235/35/19 is that ok? I know it’s stretch but can I run staggered wheels if I keep the tire size the same? Thanks for the help

NealP

Check this out

https://www.fitmentindustries.com/bl...aggered-on-awd

The key rule to follow is to have a 1% variance between the overall front and rear diameter of your wheel (including the tire)

ChervilB

I have a G37x and same wheel size and I went for 245/40/19 at the front and 275/35/19 at the back. I did a lot of research and used the tire calculator and My rolling diameter is at -0.4%.
https://tiresize.com/calculator/ check that link out and I know is the rule of thumb is you got to be within 3% or rolling diameter.

Peepz

iTrader: (1)

Just keep the rolling diameter the same. It doesn't matter how wide the wheels are



My wheel specs were 19x9.5 front and 11 in the rear. Tires were 245/40 and stretched for the rears. Had no issues. You should be good