When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
The LSD should help a little, but traction will be limited. When it comes time we'll figure out if boost by gear, or boost by speed will work out better, to assist with the lack of traction. It will be a roll monster though.
Double-edged sword - I'm working from home and definitely grateful that I'm still working, especially in an industry that is at a standstill. OTOH, so many projects...
I don't think I will unless its the same PN for the sport bumper ICC cutout. However I may need to relocate it as the cooler sits there.
Yeah those parts only work on the 07-09 sport bumper, I already checked it. On the 2010 it looks like you might need to get an entire lower grille section. Even the bracket is different as well
Oh it absolutely does. The gloss and depth is crazy. Again, it's a wet application so you have to take the screen completely out, spray it with soap and water solution, slide the protector into place and squeegee out the water then let it dry for a couple hours. I'll attach some photos that hopefully portray what I'm talking about. It's better in person though. The last two photos are of my screen with the protector on it, and another G37 on our lot with the stock screen. Here is the link to what I purchased https://www.amazon.com/Red-Hound-Aut...xpY2s9dHJ1ZQ==
be honest the day light glare cant be good. that is why i prefer matte finish screens.
I'm still working but this was a great time to drop off the car and had my Z Speed Clutch fixed. I also had the rear diff bushings replaced and the Bell brace installed (had to make some adjustments to fit with the Ark exhaust). Car is fun to drive again.
I had two small loads of gravel brought in this week so I could improve the area of my "garage" where I have to actually work on the cars. I'm probably going to give it a month to pack down and get one more load and to get right up on the railroad ties.
My brother asked me about restoring a set of headlights for a Mazda 6 he is fixing up so he can sell.
Before
After
They both could probably use a final buff, and I'll probably do that, but I was burned out and my arm was killing me from the wetsanding so I called it a night.
04-18-2020, 09:01 PM
