Sedans getting gas pictures!
The following users liked this post:
mdigiorgio35 (01-30-2018)
#170
Registered Member
The following users liked this post:
r2dmax (02-07-2018)
#171
Registered Member
#172
Registered Member
Yep, you can thank blnewt for the sweet DYI.
https://www.myg37.com/forums/d-i-y-i...-g-sedans.html
https://www.myg37.com/forums/d-i-y-i...-g-sedans.html
The following users liked this post:
mdigiorgio35 (02-09-2018)
#173
Registered User
Join Date: Nov 2016
Location: Charlotte, NC from OH thru VA
Posts: 739
Received 71 Likes
on
65 Posts
I have the vinyl sitting in my "mancave" and won't even open the box. At 1st it was too cold, not I'm just scared I'll do a crappy job. Plus I haven't seen a Smoky Quartz sedan with the trim wrapped...
#174
Registered Member
hahaha the fear of screwing it up is partly why i havent ordered but it also saves you about $300 so gotta learn sometime
#175
Administrator
iTrader: (9)
I'm just saying... no particular reason.
The following users liked this post:
r2dmax (02-09-2018)
#176
Registered Member
I did mine not knowing what to expect. It was much easier than I thought it would be. The DIY write up was a HUGE help in knowing the cut sizes and how to apply the vinyl. Get a good application tool, sharp knife, and heat gun. You'll surprise yourself when you realize how easy it is.
The following 2 users liked this post by QuinnDEskimo:
mdigiorgio35 (02-12-2018),
r2dmax (02-09-2018)
#177
Registered Member
With this DIY, it's completely reversible, unlike some others. If you mess up the cost of the vinyl isn't much either if you want to do it again. Give it a shot, you'll be surprised and Blnewt's done all of the work of figuring out how to cut the vinyl to shape.
The following 2 users liked this post by pri.g:
mdigiorgio35 (02-12-2018),
r2dmax (02-09-2018)
The following users liked this post:
r2dmax (02-14-2018)