What did you do to your Sedan today?
#6346
Registered Member
Installed illuminated emblem.
I realize opinions vary, however over the last year or so I've commented several times when I see this on a Mercedes. My wife surprised me and bought it for my birthday 😁. Starting to drop hints on exhaust...
I will change fogs to LEDs for better balance (first set of LEDs failed) and may go with a bluer HID in the future.
-Eric
I realize opinions vary, however over the last year or so I've commented several times when I see this on a Mercedes. My wife surprised me and bought it for my birthday 😁. Starting to drop hints on exhaust...
I will change fogs to LEDs for better balance (first set of LEDs failed) and may go with a bluer HID in the future.
-Eric
#6347
Registered Member
iTrader: (8)
My car blew a coupler on a coolant hose today, leaving me stranded on the side of the road First time it's let me down ever. Steam out the hood and temp pegged H.
Luckily I was .5 miles from a dealer so I had someone bring the part and tools and did a roadside repair.
If anyone has a an older / high mileage G i suggest checking the plastic bits on your coolant system... The part completely disintegrated. This one is behind the engine on the passenger side.
Luckily I was .5 miles from a dealer so I had someone bring the part and tools and did a roadside repair.
If anyone has a an older / high mileage G i suggest checking the plastic bits on your coolant system... The part completely disintegrated. This one is behind the engine on the passenger side.
#6348
Registered Member
Is that the plastic bleeder port?
#6351
Premier Member
iTrader: (5)
Installed illuminated emblem.
I realize opinions vary, however over the last year or so I've commented several times when I see this on a Mercedes. My wife surprised me and bought it for my birthday 😁. Starting to drop hints on exhaust...
I will change fogs to LEDs for better balance (first set of LEDs failed) and may go with a bluer HID in the future.
-Eric
I realize opinions vary, however over the last year or so I've commented several times when I see this on a Mercedes. My wife surprised me and bought it for my birthday 😁. Starting to drop hints on exhaust...
I will change fogs to LEDs for better balance (first set of LEDs failed) and may go with a bluer HID in the future.
-Eric
#6352
Registered Member
iTrader: (3)
Is that the plastic bleeder port?
https://www.youtube.com/watch?v=1YFxfZvIZJY
https://www.youtube.com/watch?v=1YFxfZvIZJY
#6353
Just say no!!!!!
iTrader: (14)
@saywhat¿?
Last time I did a drain/fill I didn't bleed anything. I used a vacuum filler tool to refill. Took all of 5 minutes to fill. About due for another drain/fill this summer, might be a good idea to just replace the plastic coupler with a aluminum one this time around. Car is going on 8 years old now. Which side of the engine are these coupler(s) on (driver/passenger)?
Last time I did a drain/fill I didn't bleed anything. I used a vacuum filler tool to refill. Took all of 5 minutes to fill. About due for another drain/fill this summer, might be a good idea to just replace the plastic coupler with a aluminum one this time around. Car is going on 8 years old now. Which side of the engine are these coupler(s) on (driver/passenger)?
#6354
Registered Member
iTrader: (3)
its on the passenger side. im not sure if i was jus lucky but when i did a drain and fill i just poored slowly didnt have to bleed. the radiator has a bleed screw the driver side not sure how much it helped but thats the only bleeder thats on the car from factory. . but ive since purchased a spill free funnel i used on my moms nissan when i did her radiator. its pretty functional.
#6356
Registered Member
Z1 bushings? Full kit, just rear? Actual bushings or the inserts? Tell me how you like them. I'm trying to do my car in phases so I'll do trans/sub frame kinda stuff at the same time, but I'm not there yet.
#6357
It’s only been 1 week since I bought my 2nd G, and I’ve already done a bunch for her.
- GT-R Start Button
- GT-R Map Lights
- Wrapped the Badly Worn Steering Wheel
- All new Interior LED’s, Trunk LED and License Plate LED’s from Diode Dynamics
- New Interior Aluminum Trim on the Drivers Side Front Door
- Replaced the Drivers Side Mirror
- Q60S Shift **** and Boot
Starting to look into Cool Air Intakes now. Pumped to be back in an awesome car after losing mine 6 months ago to an elderly reckless driver.
- GT-R Start Button
- GT-R Map Lights
- Wrapped the Badly Worn Steering Wheel
- All new Interior LED’s, Trunk LED and License Plate LED’s from Diode Dynamics
- New Interior Aluminum Trim on the Drivers Side Front Door
- Replaced the Drivers Side Mirror
- Q60S Shift **** and Boot
Starting to look into Cool Air Intakes now. Pumped to be back in an awesome car after losing mine 6 months ago to an elderly reckless driver.
The following 3 users liked this post by rjbecker26:
#6358
Registered Member
iTrader: (5)
I bought those too. I bought my car already modded, rebuilt salvage. I was trying to fit on another set of wheels and they all fit except the side that had the accident damage. I figure it was because they hub was wrong (was an AWD on a RWD). Turns out it was because the car had Z1 extended lugs on all 4 corners at one point, but when the company repaired the car from the accident they replaced that hub with an OEM hub, so it had the shorter OEM studs. So yeah I had to buy a set of 10 extended studs and the tool.
Z1 bushings? Full kit, just rear? Actual bushings or the inserts? Tell me how you like them. I'm trying to do my car in phases so I'll do trans/sub frame kinda stuff at the same time, but I'm not there yet.
Z1 bushings? Full kit, just rear? Actual bushings or the inserts? Tell me how you like them. I'm trying to do my car in phases so I'll do trans/sub frame kinda stuff at the same time, but I'm not there yet.
#6359
Registered Member
It’s only been 1 week since I bought my 2nd G, and I’ve already done a bunch for her.
- GT-R Start Button
- GT-R Map Lights
- Wrapped the Badly Worn Steering Wheel
- All new Interior LED’s, Trunk LED and License Plate LED’s from Diode Dynamics
- New Interior Aluminum Trim on the Drivers Side Front Door
- Replaced the Drivers Side Mirror
- Q60S Shift **** and Boot
Starting to look into Cool Air Intakes now. Pumped to be back in an awesome car after losing mine 6 months ago to an elderly reckless driver.
- GT-R Start Button
- GT-R Map Lights
- Wrapped the Badly Worn Steering Wheel
- All new Interior LED’s, Trunk LED and License Plate LED’s from Diode Dynamics
- New Interior Aluminum Trim on the Drivers Side Front Door
- Replaced the Drivers Side Mirror
- Q60S Shift **** and Boot
Starting to look into Cool Air Intakes now. Pumped to be back in an awesome car after losing mine 6 months ago to an elderly reckless driver.
#6360
Here’s where I picked them up from:
https://www.z1motorsports.com/roof-h...ir-p-6920.html
The Carsmo ***** are killing me. I had a set in my 2011 G37xS but didn’t have a chance to pull them after she was totaled by my insurance co. Lost the ***** and weather tech mats. Luckily though, my new 2012 G37xS came with the weather tech mats already installed lol.
If anyone sees this and is getting rid of a set of Carsmo *****, I’m in the market. I’m signed up to receive Ray’s emails and I have a post up in the classified section as well, but no luck yet.
The following users liked this post:
SupraOfDoom (03-02-2019)