SEDAN | Official Aggressive Offsets & FAT Tires
#151
Movin On!
iTrader: (13)
Unfortunately the sedan has about 15mm less at the fenders, most sedan guys run +35 in front on a 9 to 9.5width and a +40 to +45 in back on a 10 to 10.5" width to get flush w/ in spec camber. There's ways to get those to work but the end result won't be a great way to roll on a daily basis
#152
Registered User
Unfortunately the sedan has about 15mm less at the fenders, most sedan guys run +35 in front on a 9 to 9.5width and a +40 to +45 in back on a 10 to 10.5" width to get flush w/ in spec camber. There's ways to get those to work but the end result won't be a great way to roll on a daily basis
20x9.5 +35
20x10.5 +30 or +35 ( trying to get a nice concave look)
#153
Movin On!
iTrader: (13)
Thank for the info Blnewt! I didnt realize how much work it would take to get the wheels to fit on the sedan I might go ahead and sell the wheels and purchase another set of wheels. want to go as aggressive but practical as possible so might look into
20x9.5 +35
20x10.5 +30 or +35 ( trying to get a nice concave look)
20x9.5 +35
20x10.5 +30 or +35 ( trying to get a nice concave look)
If you don't want to camber much then you'd probably have to run a 265 in back.
The following users liked this post:
Fritz (02-26-2017)
#154
Premier Member
iTrader: (4)
Thank for the info Blnewt! I didnt realize how much work it would take to get the wheels to fit on the sedan I might go ahead and sell the wheels and purchase another set of wheels. want to go as aggressive but practical as possible so might look into
20x9.5 +35
20x10.5 +30 or +35 ( trying to get a nice concave look)
20x9.5 +35
20x10.5 +30 or +35 ( trying to get a nice concave look)
Front specs are right on though. Interested to see how it looks.
#155
Registered User
Thanks for the advice fellas! I ended up picking up a new set of wheels todayfrom another G37 owner who wanted a different look. (wheels were like new)
Went with
20x9 +32
20x10.5 +45
Really wish the rear was closer to +35 more of an aggressive look but they fit the sedan and tuck in with the airride without any problems at all.
Replacing rear tires that are currently 275/30/20...May push it up to 285/30/20 in the rear. Fronts are currently 245/35/20
The following users liked this post:
gavingw (03-20-2017)
The following users liked this post:
Fritz (02-26-2017)
#157
Registered User
I will be doing my research soon on camber kits and toe bolts soon so I can take the car to the shop for a proper alignment!
#158
Movin On!
iTrader: (13)
https://www.myg37.com/forums/g37-sed...rwd-sedan.html
#159
Wheel fitment
hello alot of nice setups here! sedans look so good with fat tires! i have a question to ask the fitment gurus, anybody running 19x9.5 front and 19x10.5 rear with a +22 offset all around? can sedans work with these specs?
#164
Premier Member
iTrader: (5)
Here's my set-up.
Wheels: Volk GT30's
F: 20"x9.5" +30mm (+35mm - 5mm)
R: 20"x10.5" +25mm (+37mm - 12mm)
Tires: Toyo T1 Sport
F: 255/30R20 (soon to be 275's)
R: 305/25R20
Camber for all four corners between -1.5° and -1.7°
Notes: Wheel specs includes spacers. And rear fenders have been widened by almost 1-1/2" per side.
Wheels: Volk GT30's
F: 20"x9.5" +30mm (+35mm - 5mm)
R: 20"x10.5" +25mm (+37mm - 12mm)
Tires: Toyo T1 Sport
F: 255/30R20 (soon to be 275's)
R: 305/25R20
Camber for all four corners between -1.5° and -1.7°
Notes: Wheel specs includes spacers. And rear fenders have been widened by almost 1-1/2" per side.
Last edited by 2GoRNot2G; 05-25-2017 at 03:47 PM.
The following 2 users liked this post by 2GoRNot2G:
blnewt (03-21-2017),
Daddy Fat Sacs (05-24-2017)
The following 2 users liked this post by blnewt:
2GoRNot2G (05-22-2017),
Daddy Fat Sacs (05-24-2017)