19" Coupe Wheels on G37 Sedan?
#1203
Registered Member
iTrader: (2)
very old photo. coupe rears front, vert rears on the back on air.
ride height on air
this was on coilovers, you can see how nice the vert concave is - couldnt go lower or i would be dragging everything on the damn motordyne
but now different wheels
ride height on air
this was on coilovers, you can see how nice the vert concave is - couldnt go lower or i would be dragging everything on the damn motordyne
but now different wheels
Last edited by ToXIc; 04-29-2020 at 08:34 PM.
The following users liked this post:
Saltman (04-30-2020)
#1206
'07 G35 6MT - 19"x9" Coupe Vert Sport wheels 245/40R19. Tein Flex Z lowered to 26.5" all 4 corners.
I don't normally hang out on this forum since I own a G35 but thought I share my experience. I brought a square set of 19" coupe wheels off an eBay seller that does refurbs. I was expecting the standard coupe wheels that I could mount on my existing 15mm H&R spacers. When I put them on I knew something was wrong as it was poking out about 3/4 - 1". After reading through on this thread I realize the seller gave me 4 vert rears. Off went the spacers and studs, then I lowered to fit a bit better under the fenders.
Dropped ~ 1.5" front, 1" rear. Even 26.5" ground to fender all around.
19x9 +30 with 15mm spacers. Poke doesn't look right so off with the spacers.
Inside wheel markings if you want vert rears
I don't normally hang out on this forum since I own a G35 but thought I share my experience. I brought a square set of 19" coupe wheels off an eBay seller that does refurbs. I was expecting the standard coupe wheels that I could mount on my existing 15mm H&R spacers. When I put them on I knew something was wrong as it was poking out about 3/4 - 1". After reading through on this thread I realize the seller gave me 4 vert rears. Off went the spacers and studs, then I lowered to fit a bit better under the fenders.
Dropped ~ 1.5" front, 1" rear. Even 26.5" ground to fender all around.
19x9 +30 with 15mm spacers. Poke doesn't look right so off with the spacers.
Inside wheel markings if you want vert rears
The following users liked this post:
qwntn (12-11-2021)
#1207
Registered Member
Not once regretted going with OEM coupe 19s. Just haven’t been able to find black Fuji center caps that fit
The following users liked this post:
Antonio Salazar (10-15-2020)
#1209
Registered Member
^fairly certain Q center caps are too big to fit OEM G37 wheels (tried to buy a set used off a Q50 sport...made the poor guy meet me, only to realize they’re not the same size).
G37 center caps are 2-1/8” or 54mm, seems the Q wheels use a larger diameter. Unless I’m mistaken? Hope I can be proven wrong.
The trick with painting the OEM G37 center cap is its ridged design; feel like its not really possible to paint them and get a nice, uniform finish.
G37 center caps are 2-1/8” or 54mm, seems the Q wheels use a larger diameter. Unless I’m mistaken? Hope I can be proven wrong.
The trick with painting the OEM G37 center cap is its ridged design; feel like its not really possible to paint them and get a nice, uniform finish.
#1210
Moderator in Moderation
iTrader: (4)
Did not realize that - thought ours were 60mm as well. Good thing I didn't buy them sight unseen...
Even with the ridges, I think you could get an even coat if you start with a self-leveling primer. I'm on the fence as to whether I should bead blast them or chemically etch the chrome, otherwise, *nothing* will stick well.
Even with the ridges, I think you could get an even coat if you start with a self-leveling primer. I'm on the fence as to whether I should bead blast them or chemically etch the chrome, otherwise, *nothing* will stick well.
#1211
Coupe wheels on sedan
Hey guys. Im looking to buy g37 coupe 19" wheels for my 2010 G37 since its on stock 17". Since the 19" are ment for coupe. What wheels size would i use for Front and Rears. Wanting the OEM lool but not large gaps
Last edited by Antonio Salazar; 10-15-2020 at 02:43 AM.
#1212
#1214
Here's what I gathered from this thread.
G37 Coupe Front: 73704
Wheels: 19"x8.5" Offset +43mm
Tires: 225/45/19
G37 Coupe Rear: 73705
Wheels: 19"x9" Offset +45mm
Tires: 245/40/19
G37 Coupe Convertible Rear: 73718
Wheels: 19"x9" Offset +30mm
Tires: 245/40/19
The coupe vert rears are easy to mistake as regular coupe as only the offsets differ. Just know all three versions will fit V36 G35/G37 models. I just happen to received four coupe vert rears and made it work. You can also add 15mm spacers to +45mm offset wheels to get the same flush look. I lowered the car a bit to fit under the fenders. Tire sizes I provided are standard OEM sizes. I have seen people stretch up to 285/35/19 on the rears.
G37 Coupe Front: 73704
Wheels: 19"x8.5" Offset +43mm
Tires: 225/45/19
G37 Coupe Rear: 73705
Wheels: 19"x9" Offset +45mm
Tires: 245/40/19
G37 Coupe Convertible Rear: 73718
Wheels: 19"x9" Offset +30mm
Tires: 245/40/19
The coupe vert rears are easy to mistake as regular coupe as only the offsets differ. Just know all three versions will fit V36 G35/G37 models. I just happen to received four coupe vert rears and made it work. You can also add 15mm spacers to +45mm offset wheels to get the same flush look. I lowered the car a bit to fit under the fenders. Tire sizes I provided are standard OEM sizes. I have seen people stretch up to 285/35/19 on the rears.
#1215
Registered Member