ToXIc

iTrader: (2)

I bought them used. So the 19x9J30 is the vert wheels?

My OCD will kill me knowing I have a wheels that's off.

blnewt

iTrader: (13)

The standard offset is +45 in back, +43 in front, so using your 20mm spacers on the front and returning the other pair of 20mm set for a pair of 15mm spacers (and using just one on the last +45 wheel) would net a zero mm difference back there, only you would know what's going on, oh, and ALL of us

ToXIc

iTrader: (2)

Lol thanks for the good laugh.... I needed that.
Kicking myself for not seeing it sooner.

ToXIc

iTrader: (2)

urg.. i've been googling my butt off.. need to find a rim

ToXIc

iTrader: (2)

so i found another rear coupe wheel yesterday locally... i was soo happy until i picked up the wheels today...

what has been seen cannot be unseen!!! i love how the vert wheels look!

front on top rear vert bottom left


coupe on the left vert on the right



so now i dont know what to do... what spacer i need to get the vert wheel flush? thinking about looking for another rear vert wheel....

what you guys recommend?

Mik3G37S

iTrader: (8)

I guess I never really posted pictures here... These are pictures from last year, as of now wheels are getting powdercoated and will be looking like new








I'll make sure to take some pictures after I get few things done

blnewt

iTrader: (13)

The verts are more aggressive offset so you shouldn't need much of a spacer, if any at all.

ToXIc

iTrader: (2)

I'll offer up the rim tomorrow and take some pics.

ToXIc

iTrader: (2)

so here it is.. no spacer.. what you guys think? too aggressive? do you think i'll have to get the fenders rolled?

i have some tein coilovers i need to install also..

blnewt

iTrader: (13)

Should be fine, they'll camber in quite a bit when you load them up.

ToXIc

iTrader: (2)

sweet.. do you think i'll need to roll the fenders?

blnewt

iTrader: (13)

Rear fenders are already rolled, IMO the tires should tuck inside the fender edge once you drop it down, just be careful when lowering the jack down just in case.

ToXIc

iTrader: (2)

Oh snap. I just went and looked. They sure are already rolled lol!

Nice!

Tomorrow I'll put on the coupe rim with the 20mm spacer just to see how it will look.

ToXIc

iTrader: (2)

so here's the coupe wheel with the popular 20mm spacer..

it actually sticks out more than the vert...

at 1st i was worried about running the 275 but looks like it will work what do you all think?

blnewt

iTrader: (13)

I'd stick w/ the vert rears without any spacers, should be OK for your 275s, the standard coupe 19s w/ a 20mm spacer (and that extra 5mm poke) might be too tight for the 275s, at least w/ in-spec camber.