AzNBoY92

iTrader: (3)

So my girl backed into my car a few weeks ago which caused a small hole (I don't know what caused this at all), minor scratches and at first it was dented in but it was hot enough to where it popped back out. Now I'm looking at some replacement options and the one I've always wanted was the Sport Bumper. Not the new ones since I really don't like the look but the first one that came out. I think I found the parts needed but does anybody know where I can find exactly what to buy and what parts are needed? Is it just the bumper and the left, right and middle grilles? This is the part number of the bumper, 62022-JL10H.

Abramite

iTrader: (1)

Didn't cross reference your part number, but all you need for an 08-10 conversion is just the bumper and grilles. If you do he 2011+ sport bumper you'll need grilles, fogs, and a slim washer tank.

AzNBoY92

iTrader: (3)

Okay and I guess reuse all the bolts and what not?

UCLAG37

I did the non-sport to 08-10 sport front bumper conversion. (I think the 08-10 looks the best of all the bumpers with the curved shape of the faux air ducts and least clutter.) Yes, you reuse all the bolts but you will notice that the undercover from the non-sport will not completely cover the sport bumper towards the corners. The bottoms of the two bumpers are shaped slightly differently. There will be a gap of an inch or two but the cover still fits. The gap isn't noticeable unless you are on the ground underneath the vehicle looking up.

If you are hardcore, you can change the undercover but it wasn't worth it to me. Good luck!

UCLAg37

Abramite

iTrader: (1)

Correct, your outside corners won't be able to be fastened... But it won't hurt anything